 |
 |
 |
|
Sealcon CD07AA-GY Gray Nylon 1/4" NPT / PG 7 Liquid-Tight Cord Grip
A gray nylon liquid-tight cord grip for 0.12" to 0.26" cable. Its concentric clamping design supports NEMA 4X and 6 protection and an IP68/IP69K rating.
Why Choose the Sealcon CD07AA-GY Cord Grip?
The Sealcon CD07AA-GY, also known as Hummel 1.209.0700.14, is a high-quality gray nylon liquid-tight strain relief cord grip. It is sold individually and accommodates 0.12"–0.26" (3–6.5 mm) cable.
It secures cable or wire at an equipment entry while helping protect the connection from moisture, contamination, and pull-out forces. The vibration-resistant ratchet dome, overlapping clamping splines, and recessed custom grommet apply concentric pressure around the cable without concentrating force at one point.
🔩 1/4" NPT / PG 7 Thread
Confirm the equipment entry matches this thread size and type
📏 0.12"–0.26" (3–6.5 mm) Cable Range
Match the cable outside diameter to the specified clamping range
🛡️ Rugged Material System
Gray nylon 6/6 body with Buna-N seal
💧 Liquid-Tight Protection
NEMA 4X and 6 (IP68/IP69K); submersible to 300 ft.
⚠️ Order the Required Mounting Hardware Separately
The locking nut and O-ring are sold separately. Confirm that both accessories match the 1/4" NPT / PG 7 installation before ordering.
📋 Concentric Cable Clamping
Sealcon's patented overlapping clamping splines and recessed custom grommet help protect the cable from damage and environmental exposure. The design applies force evenly around the cable to provide substantial pull-out resistance.
Key Features & Benefits
- Nylon 6/6 body with Buna-N seal
- Submersible to 300 ft.; NEMA 4X and 6 (IP68/IP69K)
- 150 psig (10 bar) pressure rating
- Flame protection to UL 94
- Halogen- and phosphorus-free
- Vibration-resistant ratchet dome
- Resists salt water, acids, alkalis, gasoline, and oils
- Durable, rugged construction
- RoHS and Deca-BDE, CSA approval
- Sold individually
Technical Specifications
|
Product Code
|
CD07AA-GY
|
|
Hummel Part Number
|
1.209.0700.14
|
|
Product Type
|
Gray nylon liquid-tight strain relief cord grip
|
|
Body / Seal Material
|
Gray nylon 6/6 body with Buna-N seal
|
|
Thread Size
|
1/4" NPT / PG 7
|
|
Cable O.D. Range
|
0.12"–0.26" (3–6.5 mm)
|
|
Through-Hole Diameter
|
0.49" (12.5 mm)
|
|
Body Length
|
0.83" (21 mm)
|
|
Thread Length
|
0.31" (8 mm)
|
|
Dome Wrench Flat
|
0.59" (15 mm)
|
|
Body Wrench Flat
|
0.59" (15 mm)
|
📋 Selection Checklist
1. Match the Thread: Confirm the equipment opening accepts 1/4" NPT / PG 7.
2. Measure the Cable: Verify that the cable outside diameter falls within 0.12"–0.26" (3–6.5 mm).
3. Confirm the Material: Make sure gray nylon 6/6 body with buna-n seal is appropriate for the application.
4. Check the Protection Level: The fitting is rated NEMA 4X and 6 (IP68/IP69K); submersible to 300 ft.
5. Verify the Pressure Rating: The stated pressure rating is 150 psig (10 bar).
✅ Approvals & Compliance
• RoHS compliance
• Deca-BDE (decabromodiphenyl ether) compliance
• REACH compliance
• WEEE Directive compliance
• UL/cUL Listed
• UL Registered
• EAC
• German Lloyd European approval
🔄 Cross References
• Conta Clip 22000.2
• Heyco 3208 (Cable O.D. 0.114"-0.25")
• Lütze 600660
• Jacob 50.007 PA
• Olflex S1107 (Cable O.D. 0.1"-0.25")
• Remke RD07AA-GY (Cable O.D. 0.11"-0.26")
• Woodhead 5400 (Cable O.D. 0.135"-0.2") & 5402 (Cable O.D. 0.2"-0.265")
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Additional Product Information
|
|
|
|
|
|
Related Products |
|
LiteCycle SG-TB-6P15-IS 6 Position, 12 Terminal Enclosure, Ivory, 3.54" x 2.56" x 1.77"
|
|
LiteCycle SG-TB-6P15-GS 6 Circuit, 12 Terminal Enclosure, Gray, 3.54" x 2.56" x 1.77"
|
|
LiteCycle SG-TB-4P15-GS 4 Position, 8 Terminal Enclosure, Gray, 3.54" x 1.85" x 1.77"
|
|
Sealcon NP-07-GY Gray 1/4" NPT / PG 7 Locking Nut
|
|
|
|
|
|
|
|
|
|
|
|
|
Sealcon OR-07-BN 1/4" NPT / PG 7 Buna-N O-Ring
|
|
LiteCycle SG-TB-4P15-GC 4 Position Terminal Enclosure, Gray w/ Clear Cover, 3.54" x 1.85" x 1.77"
|
|
|
|
|
|
|
|
|
|
|
|
|
