Secure Cable Entry and Strain Relief
The dome compression mechanism seals around the cable jacket, securing the cable without damaging the internal conductors. A ratchet dome resists vibration, and the UV-resistant black nylon housing supports industrial and outdoor cable-entry applications. Select the fitting by cable outside diameter and PG 9 mounting requirements.
Construction and Dimensions
The black nylon 6/6 body measures .87" (22 mm) in length, with a .31" (8 mm) mounting thread. The through-hole diameter is .6" (15.2 mm), and the dome and body wrench flats each measure .75" (19 mm). A Buna-N seal supports liquid-tight cable entry.
Features and Benefits
- UV-resistant black nylon 6/6 housing with a Buna-N seal.
- Cable outside diameter range: 0.16–0.31 inches (4–8 mm).
- Vibration-resistant ratchet dome supports secure cable retention.
- Resistance to salt water, acids, alkalis, gasoline, and oils.
- Rugged construction for industrial cable-entry applications.
- Halogen- and phosphorus-free construction.
Applications
Recommended uses include cable entry into industrial control panels, junction boxes, machine enclosures, and equipment housings. The UV-resistant nylon body also supports outdoor equipment installations when the complete entry assembly meets the required sealing conditions.
Installation and Selection Notes
- Match the mounting connection to PG 9 and confirm the .6" (15.2 mm) through-hole dimension.
- Check available thread engagement against the .31" (8 mm) thread length and provide tool access for the .75" (19 mm) wrench flats.
- Use a cable outside diameter within 0.16–0.31 inches (4–8 mm).
- Seat the cable through the seal and tighten the dome to compress the seal evenly around the cable jacket.
- Locking nut and O-ring sold separately.
Sealing and Environmental Protection
This cord grip carries IP68 and IP69K protection ratings and NEMA 4X and NEMA 6 ratings. Its pressure rating is 150 psig (10 bar), with submersion capability to 300 feet. Match the cable diameter, mounting arrangement, and sealing components to the installation so the complete cable-entry assembly maintains the required protection.
Cross-References
- Hummel 1.209.0901.14
- Conta Clip 22021.1
- Heyco 3210 (Cable O.D. 0.181"-0.312")
- Lütze 600861
- Jacob 50.009PA/SW
- Olflex S2109 (Cable O.D. 0.14"-0.31")
- Remke RD09AA-BK (Cable O.D. 0.15"-0.32")
Compare thread, cable diameter range, dimensions, materials, and required ratings when evaluating a replacement. Cross-reference cable ranges can differ from the 4–8 mm range of this cord grip.
