Menics PMEF-201-RY 2 Stack LED Tower Light, 45mm Dia., 12V

Menics PMEF-201-RY PME 2-stack LED Tower Signal Light: Red and Yellow, 12V AC/DC, 45mm

Preassembled 45mm Menics PME Series signal tower with 2 LED tiers, Red and Yellow lenses, steady and flashing operation, prism-cut optics, a 25" lead, and IP52 protection.

Clear Machine-Status Indication in a Compact 45mm Tower

The Menics PMEF-201-RY 2-stack LED tower light provides Red and Yellow indication for two machine states, alarms, or process conditions. Each tier supports steady or flashing operation, allowing control designers to distinguish continuous status information from conditions that require immediate attention.

Prism-cut polycarbonate resin lenses distribute the LED output more evenly around the tower. Silver divider bands separate the 2 tiers, while vibration-absorbing rubber helps the preassembled light operate in machinery and equipment applications exposed to vibration up to 3 mm @10~55Hz.

🚦 2 LED Tiers

Red and Yellow signaling in a compact, preassembled PME Series tower.

✨ Steady & Flashing

Select continuous illumination or a flashing signal at 80 times per minute.

🔆 Prism-Cut Lenses

Optical lens pattern promotes even light distribution for improved visibility around equipment.

⚙️ Vibration-Absorbing Design

Embedded rubber supports operation in high-vibration machinery environments.

⚠️ Confirm Voltage, Mounting Hardware, and Lead Length

This model requires a 12V AC/DC supply and is provided with a 25" lead. Mounting poles, bases, and wall brackets are selected separately. A 750 mm or 1000 mm mounting pole requires a longer lead; the lead can be modified during installation or ordered with a factory modification.

📋 Mounting Options

Pole mount: Combine a compatible pole with a base.

Wall mount: Combine a compatible pole with a wall bracket.

Surface mount: Use the 22 mm MAP-0022 pole with a base, or install the threaded 43 mm MAP-M043 pole through a prepared hole with lock nuts.

Key Features & Benefits

Preassembled PME Tower: Modular construction simplifies future tier or component replacement
Red and Yellow LED Lenses: Provides 2 clearly separated visual signals
Dual Operating Modes: Supports steady and flashing illumination
Silver Divider Bands: Visually separates each LED tier
IP52 Protection: Provides protection from harmful dust deposits and water drops up to 15 degrees from vertical
No Buzzer: Visual-only signaling for applications that do not require an audible alarm

Technical Specifications

Part Number	PMEF-201-RY
Brand	Menics
Series	PME
Product Type	LED Tower Signal Light
Power Supply	12V AC/DC
Light Operation	Steady & Flashing
LED Colors	Red and Yellow
Number of LED Tiers	2 Stack
Current Consumption	0.055 A (Red), 0.07 A (Yellow)
Brightness	5 Lumens, 400 mcd (Red), 7 Lumens, 560 mcd (Yellow)
Flashing Rate	80 times per minute
Lead Length	25"
Dimensions	167 mm Height x 45 mm Diameter (6.57" x 1.77")
Lens Material	Polycarbonate Resin
Housing Material	ABS Plastic Resin
Buzzer	None
Vibration	3 mm @10~55Hz
Ambient Temperature	-15 C to 40 C (5 F to 104 F)
Ambient Humidity	45-85% Relative Humidity
Recommended Wire Size	1007 UL / 22 AWG
IP Protection	IP 52 (Protection from harmful dust deposits and water drops up to 15 degrees from vertical)
Approvals	CE, RoHS

📋 Basic Installation Overview

1. Verify Power: Confirm the control voltage matches 12V AC/DC before wiring.

2. Select Mounting: Choose the compatible pole, base, or wall bracket for the installation surface.

3. Check Lead Length: Confirm that the 25" lead reaches the termination point; extend or request modification for 750 mm and 1000 mm poles.

4. Wire the Signals: Use the recommended 1007 UL / 22 AWG conductors and connect each LED tier for the required steady or flashing operation.

5. Test Operation: Energize and verify each color and operating mode before placing the equipment into service.

🔗 Menics Mounting Accessory Chart

Use the compatibility chart to select the correct pole, base, or wall bracket for this PME Series tower light.

Menics Signal Light Mounting Accessory Chart

Menics PMEF-201-RY 45 mm 2 Stack LED Tower Light, Red Yellow, Flashing, 12V