 |
 |
 |
|
Saginaw SCE-121010SC Carbon Steel Screw Cover Enclosure, 12.13 x 10 x 10 in.
Allow more depth for electrical components and wiring with a 10 inch deep steel enclosure. The housing has no holes or knockouts, so entry positions can be planned for the job.
✅ Applications
Consider this deep enclosure for a control assembly with projecting components or wiring that needs additional clearance. Check the complete layout before choosing the subpanel.
A Deep Screw Cover Enclosure for Electrical Assemblies
The Saginaw Control & Engineering SCE-121010SC screw cover enclosure offers a 10 inch depth for electrical assemblies that need additional space behind the cover. It can serve as a control box or terminal enclosure, with mounting standoffs provided for a separate subpanel.
The enclosure measures 12.13" H x 10" W x 10" D and is made from 0.063" carbon steel with an ANSI-61 gray powder coating. Its continuously welded seams are ground smooth. Cover screws thread into sealed wells, and an oil resistant gasket seals the cover.
Key Features & Benefits
- Welded Construction: Continuously welded seams are ground smooth.
- Unpunched Housing: No holes or knockouts.
- Cover Attachment: Screws thread into sealed wells.
- Gasket: Oil resistant material.
- Subpanel Support: Mounting standoffs are provided. Subpanels are sold separately.
- Rear Mounting: Mounting provisions are located on the back at the top and bottom.
Specifications
|
Part Number
|
SCE-121010SC
|
|
Brand
|
Saginaw Control & Engineering
|
|
Enclosure Type
|
Screw cover enclosure
|
|
Dimensions (H x W x D)
|
12.13" x 10" x 10"
|
|
Metric Dimensions (H x W x D)
|
308.102 x 254 x 254 mm
|
|
Material
|
Carbon steel
|
|
Material Thickness
|
0.063"
|
|
Finish
|
ANSI-61 gray powder coating
|
|
Cover Fastening
|
Screws threaded into sealed wells
|
|
Gasket
|
Oil resistant
|
|
Holes and Knockouts
|
None
|
|
Mounting Provisions
|
Rear, top and bottom
|
|
Subpanel Standoffs
|
Provided
|
|
Subpanel
|
Sold separately
|
|
Industry Standard Group
|
IS4
|
|
NEMA Types
|
3R, 4, 12, 13
|
|
UL Listed Types
|
3R, 4, 12
|
|
CSA Types
|
3R, 4, 12
|
|
IEC Standard
|
IEC 60529
|
|
Ingress Protection
|
IP66
|
📦 Enclosure and Subpanel Provisions
One SCE-121010SC screw cover enclosure with standoffs for mounting a subpanel. The subpanel is sold separately.
⚠️ Type 3R Installation Requirements
Special IS4 installation instructions apply to maintain the Type 3R environmental rating. Follow the instructions located on the enclosure door when installing this model.
🔧 Mounting and Cable Entry
Use the mounting provisions on the back at the top and bottom. Plan cable entry locations because the enclosure has no holes or knockouts. The internal standoffs support a compatible subpanel, which is purchased separately.
|
|
|
 |
|
 |
|
