 |
 |
 |
|
Saginaw SCE-10086SC Carbon Steel Screw Cover Enclosure, 10.13 x 8 x 6 in.
House wiring connections or terminal components in a compact steel control box. A screw cover with sealed screw wells and an oil resistant gasket closes the enclosure.
✅ Application Guide
Use this screw cover enclosure for wiring junctions or terminal assemblies that require an enclosed mounting space. Plan entry positions before installation because the housing has no factory holes or knockouts.
A Screw Cover Box for Wiring Connections
The Saginaw Control & Engineering SCE-10086SC screw cover enclosure can serve as a junction box for field wiring or as a terminal enclosure. The body has no holes or knockouts, allowing cable entry locations to be planned around the installation.
Made from 0.063" carbon steel, the enclosure measures 10.13" H x 8" W x 6" D and has an ANSI-61 gray powder coating. Cover screws thread into sealed wells, and an oil resistant gasket seals the cover. Continuously welded seams are ground smooth.
Key Features & Benefits
- Continuously welded and ground smooth seams
- No holes or knockouts
- Cover screws thread into sealed wells
- Oil resistant gasket
- Standoffs for mounting subpanels provided (subpanels sold separately)
- Mounting provisions are located on the back, at the top and bottom
Specifications
|
Part Number
|
SCE-10086SC
|
|
Brand
|
Saginaw Control & Engineering
|
|
Enclosure Type
|
Screw cover enclosure
|
|
Dimensions (H x W x D)
|
10.13" x 8" x 6"
|
|
Metric Dimensions (H x W x D)
|
257.302 x 203.2 x 152.4 mm
|
|
Material
|
Carbon steel
|
|
Material Thickness
|
0.063"
|
|
Finish
|
ANSI-61 gray powder coating
|
|
Closure
|
Cover screws threaded into sealed wells
|
|
Gasket
|
Oil resistant gasket
|
|
Subpanel
|
Sold separately
|
|
Industry Standard Group
|
IS4
|
|
NEMA Types
|
3R, 4, 12, 13
|
|
UL Listed Types
|
3R, 4, 12
|
|
CSA Types
|
3R, 4, 12
|
|
Ingress Protection
|
IP66
|
|
IEC Standard
|
IEC 60529
|
📦 Enclosure and Mounting Provisions
One SCE-10086SC enclosure with subpanel mounting standoffs. The subpanel is sold separately.
⚠️ Environmental Ratings
Follow the special instructions on the enclosure door to maintain the Type 3R environmental rating. Type 3R requirements must be met for outdoor installations. Industry standard group: IS4.
🔧 Installation Notes
Mounting provisions are located on the back at the top and bottom. Plan cable entry locations before installation because there are no holes or knockouts. The subpanel mounts on the provided standoffs.
|
|
|
 |
|
 |
|
