 |
 |
 |
|
Saginaw Control & Engineering SCE-2PBSSI is a 2 position push button enclosure. It is made from 0.063" 304 stainless steel with a #4 brushed finish and two 22.5mm pushbutton entrances in a 1x2 configuration. Used for keeping oil-tight push buttons, switches, and pilot lights protected in corrosive environments or hose down applications. (See link to applicable push buttons below)
- 5.75" H x 3.25" W x 2.75" D (146.05mm x 82.55mm x 69.85mm)
- Seams are continuously welded
- Cover screws thread into sealed wells
- Accepts any brand of oil-tight push buttons, switches, or pilot lights
- 4 way standard push button entrances
- Cover can be immediately removed
- Gasket is oil & water resistant
- Welded mounting provision located on the back at the top and bottom
- IS5 industry standards - NEMA Type 4, 4x, 12 and Type 13, UL Listed Type 4, 4x, and 12, CSA Type 4, 4x, and 12, IEC 60529, IP 66
|
|
|
 |
|
 |
|
