Menics PMEZ-102-R 1 Stack LED Tower Light, 45mm, 24V

Menics PMEZ-102-R 1-Tier 45 mm LED Tower Light, 24V AC/DC, with Buzzer

Audible and visual signaling with red lenses.

Why Choose the Menics PMEZ-102-R Tower Light?

The Menics PMEZ-102-R combines a single red LED signal light with an audible buzzer for visual and sound-based indication. This 24V AC/DC tower light supports steady and flashing illumination, and its buzzer is rated at 80 dB at 1 meter.

Prism-cut lenses distribute light more evenly across the 45 mm diameter tower. The PME series modular construction simplifies component replacement, and silver bands define each tier. Embedded vibration-absorbing rubber supports use in high-vibration areas. The light arrives preassembled with a 25-inch lead.

💡 Steady & Flashing

Use continuous illumination or flashing at 80 flashes per minute.

🔧 Modular Construction

Replace individual components when maintenance is needed.

🔍 Prism-Cut Lenses

Distribute light more evenly across the lens surface.

🔊 Audible Alarm

80 dB buzzer at 1 meter complements the visual signal.

⚠️ Lead Length for Tall Mounting Poles

A 750 mm or 1000 mm mounting pole requires a longer lead than the standard 25-inch lead. The lead can be modified by the installer or by the factory upon request.

📋 Audible and Visual Signaling

Steady and flashing LEDs work alongside the built-in 80 dB buzzer, rated at 1 meter. This model has an IP50 rating for protection from harmful dust deposits.

📋 Mounting Options

Pole mount: Use a pole and base.

Wall mount: Use a pole and wall bracket.

Surface mount: Use a 22 mm pole (MAP-0022) with a base, or a threaded 43 mm pole (MAP-M043). Insert the threaded pole through a predrilled hole and tighten it with lock nuts on both sides. Check the mounting accessory chart for compatible poles and bases.

📚 Mounting Accessories

Choose compatible mounting hardware using the Menics Signal Light Mounting Accessory Chart.

Technical Specifications

Brand	Menics
Model	PMEZ-102-R
Light Operation	Steady and flashing
Power Supply	24V AC/DC
Current Consumption	0.06 Amps
Lead Length	25"
LED Colors	Red
Number of LED Tiers	1 Stack
Lens Material	Polycarbonate Resin
Housing Material	ABS Plastic Resin
Dimensions (Tower Light Only)	127 mm Height x 45 mm Diameter (5" x 1.77")
Brightness	10 Lumens, 800 mcd
Buzzer Volume	80 Decibels at 1 meter
Flash Rate	80 Flashes per minute
Vibration	3 mm at 10–55 Hz
Ambient Temperature	-15°C to 40°C (5°F to 104°F)
Ambient Humidity	45-85% Relative Humidity
Recommended Wire Size	1007 UL / 22 AWG
IP Protection	IP50 (Protection from harmful dust deposits)
Approvals	CE, RoHS