Menics PMEF-101-B 1 Stack LED Tower Light, 45mm Dia., 12V

Menics PMEF-101-B 1-Tier Blue 12V AC/DC Steady/Flashing LED Tower Light

45 mm Menics PME Series LED tower signal light with 1 tier, blue indication, 12V AC/DC power, and steady and flashing light operation without a buzzer. Prism-cut lenses, modular construction, a pre-assembled lead, and vibration-absorbing rubber support reliable equipment-status indication.

✅ Single-Tier Blue Steady/Flashing Configuration

The PMEF-101-B is a single-tier blue LED signal light with both steady and flashing modes. It does not include a buzzer, making it a dedicated visual indicator in the compact 45 mm PME Series format.

Menics PMEF-101-B PME Series LED Tower Signal Light

The Menics PMEF-101-B is a single-tier blue LED tower light designed for either steady or flashing visual indication without an audible buzzer.

The prism-cut blue lens is designed for more even light distribution. A modular PME Series construction, pre-assembled wiring lead, and internal vibration-absorbing rubber support straightforward installation and service.

⚡ Steady + Flashing Modes

One LED tier supports both continuous illumination and flashing operation for two distinct visual signaling behaviors.

💡 Prism-Cut Lens

The prism-cut blue lens helps distribute LED light more evenly across the signal surface.

🧩 Modular PME Design

Modular construction makes individual components easier to change if maintenance or replacement is needed.

🛠️ Vibration-Absorbing Build

Internal vibration-absorbing rubber supports use on operating equipment where vibration is present.

Key Features & Benefits

Two Visual Operating Modes: Select steady illumination or flashing operation from the same single-tier signal light.
Dedicated Blue Indication: A single colored lens provides a focused visual signal without additional stacked colors.
No Integrated Buzzer: Designed for applications where visual signaling is needed without an audible alarm.
Even Light Distribution: The prism-cut lens helps spread the LED output across the signal area.
Service-Friendly Construction: PME Series modular construction makes component changes easier when required.
Pre-Assembled Wiring: The tower is supplied assembled with its lead attached for installation.

Specifications

Part Number	PMEF-101-B
Brand	Menics
Series	PME
Tower Diameter	45 mm
Light Operation	Steady & Flashing
Power Supply	12V AC/DC
Current Consumption	0.036 Amps
LED Color	Blue
Number of LED Tiers	1 Stack
Brightness	1 Lumen, 80 mcd
Buzzer	None
Flashing Rate	80 times per minute
Lead Length	25"
Lens Material	Polycarbonate Resin
Housing Material	ABS Plastic Resin
Dimensions (Tower Light Only)	127 mm Height x 45 mm Diameter (5" x 1.77")
Vibration	3 mm @10~55Hz
Ambient Temperature	-15 C to 40 C (5 F to 104 F)
Ambient Humidity	45-85% Relative Humidity
Recommended Wire Size	1007 UL / 22 AWG
IP Protection	IP 52 (Protection from harmful dust deposits and water drops up to 15 degrees from vertical)
Approvals	CE, RoHS

📦 Mounting Options

Pole Mount: Pole + base

Wall Mount: Pole + wall bracket

Surface Mount: 22 mm pole (MAP-0022) + base, or threaded 43 mm pole (MAP-M043) installed through a pre-drilled hole and secured with lock nuts.

⚠️ Lead Length Note

If a 750 mm or 1000 mm mounting pole is used, a longer lead is required. The lead can be modified during installation or ordered with a factory modification upon request.

🔧 Mounting Accessory Guide

Use the Menics Signal Light Mounting Accessory Chart to identify compatible poles, bases, and wall-mount components for this tower light.

📋 Model Selection Note

Choose this model when a single blue visual signal is required with both steady and flashing operation. This PMEF configuration has no buzzer; select a buzzer-equipped PME model if an audible warning is also required.

Menics PMEF-101-B 45 mm 1 Stack LED Tower Light, Blue, Flashing, 12V