 |
 |
 |
|
The Menics PMEF-402-RYGB 4 stack LED tower signal light has a 45mm diameter and is rated for 24V. It has red, yellow, green, & blue lenses, with a steady & flashing light. Prism cut lenses offer a more even light distribution. This PME series light has a modular system, making it simpler to change out parts if necessary. The silver bands clearly define each stack. The signal light itself comes pre-assembled, with a 25" lead. It can be used in high vibration areas due to the vibration absorbing rubber embedded inside. Rated IP 52.
Mounting (See mounting accessories below)
- Pole Mount: Pole + Base
- Wall Mount: Pole + Wall Bracket
- Surface Mount: 22 mm Pole (MAP-0022) + Base or Threaded 43 mm Pole (MAP-M043). Threaded pole would be inserted into a pre-drilled hole using lock nuts on either side to tighten in place.
- See our mounting accessories chart (link below description) to see which poles and bases are compatible
- Note: If you are using a 750 mm or 1000 mm pole, you will need a longer lead length. The lead can be modified yourself, or by the factory upon request
Specifications
- Light Operation- Steady & Flashing
- Power Supply- 24V AC/DC
- Current Consumption- 0.03 Amps (Red), 0.045 Amps (Yellow), 0.035 Amps (Green & Blue)
- Lead Length: 25"
- LED Colors- Red/Yellow/Green/Blue
- Number of LED Tiers- 4 Stack
- Lens Material- Polycarbonate Resin
- Housing Material- ABS Plastic Resin
- Flashing Rate- 80 times per minute
- Dimensions (Tower Light Only)- 247 mm Height x 45 mm Diameter (9.72" x 1.77")
- Brightness- 10 Lumens, 800 mcd (Red), 11 Lumens, 880 mcd (Yellow), 4 Lumens, 320 mcd (Green), 1 Lumen, 80 mcd (Blue)
- Buzzer- None
- Vibration- 3 mm @10~55Hz
- Ambient Temperature- -15 C to 40 C (5 F to 104 F)
- Ambient Humidity- 45-85% Relative Humidity
- Recommended Wire Size- 1007 UL / 22 AWG
- IP Protection- IP 52 (Protection from harmful dust deposits and water drops up to 15 degrees from vertical)
- Approvals- CE, RoHS
Find out which mounting accessories you need with our Menics Signal Light Mounting Accessory Chart
|
|
|
 |
|
 |
Related Products |
|
Menics MAP-M750 Threaded Pole for Tower Lights, 20mm Diameter, 750mm (29.53")
|
|
Menics MAP-M043 Threaded Pole for Tower Lights, 20mm Diameter, 43mm (1.69")
|
|
Menics MAP-0240 Pole for Tower Lights, 20mm Diameter, 240mm (9.45")
|
|
Menics MAP-DS40-BLK Plastic Wall Bracket for Tower Lights
|
|
|
|
|
|
|
|
|
|
|
|
|
Menics MAP-0750 Pole for Tower Lights, 20mm Diameter, 750mm (29.53")
|
|
Menics MAP-0022 Pole for Tower Lights, 20mm Diameter, 22mm (0.87")
|
|
Menics MAM-B070R Rotating Plastic Base for Tower Lights, 70mm Diameter
|
|
Menics MAM-B070C Plastic Base for Tower Lights, 70mm Diameter
|
|
|
|
|
|
|
|
|
|
|
|
|
Menics PME-02-Y Yellow LED Module for PME Tower Lights, 24V & 90-240V
|
|
Menics PME-02-R Red LED Module for PME Tower Lights, 24V & 90-240V
|
|
Menics PME-Y Yellow Lens for PME Tower Lights
|
|
Menics MAM-B070D Plastic Base for Tower Lights w/ Gasket, 70mm Diameter
|
|
|
|
|
|
|
|
|
|
|
|
|
Menics PME-G Green Lens for PME Tower Lights
|
|
Menics MAP-0060 Pole for Tower Lights, 20mm Diameter, 60mm (2.36")
|
|
Menics MAM-DS25 L-Angle Wall Bracket for Tower Lights
|
|
Menics MAP-M240 Threaded Pole for Tower Lights, 20mm Diameter, 240mm (9.45")
|
|
|
|
|
|
|
|
|
|
|
|
|
Menics PME-B Blue Lens for PME Tower Lights
|
|
Menics MAP-1000 Pole for Tower Lights, 20mm Diameter, 1000mm (39.37")
|
|
Menics PME-02-B Blue LED Module for PME Tower Lights, 24V & 90-240V
|
|
Menics PME-02-G Green LED Module for PME Tower Lights, 24V & 90-240V
|
|
|
|
|
|
|
|
|
|
|
|
|
Menics MAP-M1000 Threaded Pole for Tower Lights, 20mm Diameter, 1000mm (39.37")
|
|
Menics PME-R Red Lens for PME Tower Lights
|
|
|
|
|
|
|
|
|
|
|
|
|
