Overview
The
FF12U is a Fandis FF series filter assembly designed to filter incoming air before it reaches control cabinet electronics, automation equipment, and enclosure components. This Gray RAL 7035 assembly has a 150mm x 150mm footprint and helps reduce dust and contaminant buildup while maintaining ventilation.150mm x 150mmGray RAL 7035IP 54 to EN 60529 / Type 12 to UL 508Class G3, According to EN 779
Fan not included. Use this assembly where passive cabinet ventilation is needed and active cooling is not required.
💨 Passive Cabinet Air Filtration
Protection: IP 54 to EN 60529 / Type 12 to UL 508
Filter Media: Class G3, According to EN 779
Housing: ABS/PC Alloy
Fan Status: Fan not included
Key Features
- 150mm x 150mm size: compact enclosure filter assembly footprint
- Gray RAL 7035: matches cabinet and equipment appearance
- Elastic Clips or 4 Self Threading Screws: quick mounting and service access
- 85% - DIN 24185 separation: captures airborne particles before they enter the enclosure
- 600 g/m^2 dust retention: supports longer service intervals
- -10 C to 60 C (14 F to 140 F) operating temperature: suitable for demanding cabinet environments
- -40 C to 70 C (-40 F to 158 F) storage temperature: built for broad storage conditions
✅ Why Choose This Filter Assembly?
This filter assembly helps keep foreign particles away from the components inside the enclosure while still allowing airflow through the cabinet opening.
Applications
The Fandis FF12U is designed for enclosure ventilation points where incoming air should be filtered before reaching cabinet components:
- Control cabinet intake openings
- Industrial automation enclosures
- PLC and drive cabinets
- Electrical panels with passive ventilation
- Electronics housings where dust control is needed
⚠️ Important Installation Info
Fan not included – this item is the filter assembly only.
Verify enclosure opening and wall thickness before installing.
Use the listed protection rating to confirm suitability for the installation environment.
Performance Benefits
- Helps reduce dust and foreign particle buildup inside the enclosure
- Allows air to pass through for passive cabinet ventilation
- Supports longer component life by keeping contaminants away from electronics
- Provides fast filter access for maintenance without complex disassembly
🛠️ Maintenance Tip
Inspect the filter media during routine cabinet service. Keeping the filter clean helps maintain airflow and reduces contaminant buildup inside the enclosure.
