 |
 |
 |
|
The Suns SND4172-SL2-C safety limit switch has a glass fiber reinforced plastic housing with an angular roller lever. M20 single conduit housing with a 2NC slow action contact block. The contacts are galvanically separated, with a positive opening for the NC contacts. 4 x 90 degree actuator positions. The self lifting clamps on the screw terminals make wiring a more efficient process. Meets the standard set by EN 50047. A variety of industries and applications make use of these limit switches, including industrial automation, packaging machinery, material handling, and construction equipment.
Specifications
- Conduit- M20
- Body Style- Single Conduit
- Contact Block- 2NC Slow Action
- Operation- Angular Roller Lever
- Operating Speed- 0.05mm-2m/sec
- Operating Frequency- Mechanical: 120 ops/min Electrical: 30 ops/min
- Insulation Resistance- > 100MOhm @ 500 VDC
- Contact Resistance- < 25mOhm
- Rated Current/Voltage- 10 A / 600 VAC
- Electrical Rating- UL/cUL Listed(E216958) for AC15 A600/ DC13 Q300
- Dielectric Strength-1000VAC for 1 min between non-continuous terminals
2500VAC for 1 min between each terminal and ground
- Lifespan- Mechanical: 10,000,000 Electrical: 500,000
- Operating Temperature- -25 - 80 C (-13 - 176 F) without formation of ice
- Humidity- < 95% RH
- Protection Class- IP 67 (Total protection from dust and temporary immersion in water - 1 meter (3.28') for up to 30 minutes)
- Approvals- UL, CUL, CSA, CE, CCC
Suns Safety Limit Switch with Roller Lever SND4172-SL2-C
|
|
|
 |
|
 |
|