 |
 |
 |
|
The Suns SND4111-SL2-C safety limit switch has a glass fiber reinforced plastic housing with a plunger. M20 single conduit housing with a 2NC slow action contact block. The contacts are galvanically separated, with a positive opening for the NC contacts. 4 x 90 degree actuator positions. Wiring is made easier due to the self lifting clamps on the screw terminals. Meets the standard set by EN 50047. These limit switches prove useful in industries and applications such as industrial automation, packaging machinery, material handling, and construction equipment.
Specifications
- Conduit- M20
- Body Style- Single Conduit
- Contact Block- 2NC Slow Action
- Operation- Plunger
- Overall Dimensions- 30.5mm Width x 31mm Depth x 74.5mm Height
- Operating Speed- 0.05mm-2m/sec
- Operating Frequency- Mechanical: 120 ops/min Electrical: 30 ops/min
- Insulation Resistance- > 100MOhm @ 500 VDC
- Contact Resistance- < 25mOhm
- Rated Current/Voltage- 10 A / 600 VAC
- Electrical Rating- UL/cUL Listed(E216958) for AC15 A600/ DC13 Q300
- Dielectric Strength-1000VAC for 1 min between non-continuous terminals
2500VAC for 1 min between each terminal and ground
- Lifespan- Mechanical: 10,000,000 Electrical: 500,000
- Operating Temperature- -25 - 80 C (-13 - 176 F) without formation of ice
- Humidity- < 95% RH
- Protection Class- IP 67 (Total protection from dust and temporary immersion in water - 1 meter (3.28') for up to 30 minutes)
- Approvals- UL, CUL, CSA, CE, CCC
Suns Safety Limit Switch with M20 Cable Entry SND4111-SL2-C
|
|
|
 |
|
 |
|