The Red Lion Sixnet
® Series SLX-18MG-1 is a fully managed eighteen port Industrial Ethernet Switch. Housed in an aluminum DIN rail enclosure, this SlimLine Plus SLX series switch features sixteen 10/100BaseTX RJ45 ports and two Gigabit SFP/RJ45 ports. The two Gigabit ports can handle either 10/100/100BaseTX copper RJ45 or 100/1000BaseSX/LX LC style fiber optic connections. This switch can provide real time data and a secure operation. The durable construction and reliable operation gives it the ability to stand up to the demands of industrial networks.
PRODUCT FEATURES
- High number of ports in a compact housing
- Auto sensing 10/100BaseTX, Duplex, & MDIX
- Store and Forward Technology
- Redundant Power Inputs (10-30VDC)
- Configurable Self Test/Alarm Contact
- Rugged Metal DIN-Rail Enclosure
- Power surge and spike protection
- Configurable Management Features
- Broadcast & multicast storm protection
- Lifetime free firmware upgrades
- Reverse polarity protection
- Full IEEE 802.3 Compliance
- UL/CSA, CE, & Hazardous Locations (Zone 2) rated (pending)
MANAGEMENT FEATURES
- SNMPv1/v2/v3 - v1& v2 for managing networks, v3 authentication & encryption for security - reports on events
- RMON & port mirroring for advanced diagnostics
- DHCP server
- SNTP
- TFTP
- STP
- Rapid Spanning Tree (RSTP) or Real-Time Ring for redundant ring or mesh networks
- QoS/CoS/ToS/DS - prioritizes queuing
- IGMPv1/v2 - Multicast filtering (snooping & querying)
- VLAN (tag and port based) - traffic segregation
- HTTP/HTTPS (SSL & TSL), SSH for security
- Telnet, CLI Interface, or Web configuration
- Modbus/TCP
Red Lion Sixnet SLX-18MG User Manual
Sixnet 18 Port Ethernet Switch
Ethernet Performance Managed, Store & Forward, Wire Speed Shielded RJ45 Ports 1-16: 10/100BaseTX Shielded RJ45 Ports 17-18: 10/100/1000BaseTX RJ45 Port Speed Auto-negotiation RJ45 MDI/MDIX Auto-crossover RJ45 TD & RD auto-polarity Ports 17 & 18 are combination gigabit ports that have an RJ45 connector & fiber connector Only one type of connector on Ports 17 & 18 can be used at a time SFP Ports 17 & 18 accommodate mini GBIC transceivers Fiber Optic Port speed: 100/1000BaseSX/LX Typical Multimode Fiber: 0.55 KM, 850 nm, 50-62.5/125 um Typical Singlemode Fiber: 10 KM, 1310 nm, 9-10/125 um Typical Long Haul Fiber: 120+ KM, 1550 nm, 9-10/125 um Typical Latency for 10Mbps Ports: 16 us + frame time- varies on load & settings Typical Latency for 100Mbps Ports: 5 us + frame time- varies on load & settings Full/Half Duplex Operation configurable per port MAC Addresses supported: 8192 Memory Bandwidth: 32 Gbps Ethernet Isolation: 1500 VRMS 1 min Ethernet Compliance IEEE 802.3u (Fast Ethernet 100Mbps for new devices) IEEE 802.3 (10Mbps Ethernet supports legacy devices) IEEE 802.3x (Full-Duplex with flow control) IEEE 802.3D/w (Rapid spanning tree for redundant rings & Spanning Tree for interoperability) IEEE 802.3p (Priority Queuing - QoS, CoS, ToS/DS) IEEE 802.3Q (VLAN for traffic segregation) Real-Time Ring Link Loss Recovery: 30 mS plus 5 mS per hop Switches in a Ring: <50 for best performance Multiple rings supported: configurable OK Alarm Output Shows power and operational status Voltage same as input voltage Max. current output: 0.5 A Power Input Typical Input Power: 8 W (no fiber) 10 W (w/ 2 fiber) Transient Protection: 15,000 watts peak Spike Protection: 5000 watts (10 times for 10 uS) Environmental Operating Temperature: -40 C to 75 C Storage Temperature: -40 C to 85 C Humidity (Non-Condensing): 5 to 95% RH Vibration & Shock: IEC60068-2-6, -27 Standards Compliance Electrical Safety: UL 508/CSA C22.2/14, EN61010-1, CE EMC: FCC Part 15, ICES-003, EN61000-6-4, EN61000-6-2, CE Hazardous Locations: UL 1604/CSA C22.2/213 (Class I, Div 2), EN60079-15 (Zone 2, Category 3), CE (ATEX) Maritime: Marine & Offshore per ABS RoHS and WEEE Compliant Physical DIN-Rail or Panel Mount Dimensions: 6.02" H x 2.88" W x 4.69" L Case: Corrosion-resistant aluminum, rated IP 40
|