 |
 |
 |
|
The Seifert 870605201 Progressive electrical enclosure air conditioner is a 230V industrial cooling unit engineered for thermal management in control cabinets with sensitive electronics. It delivers a 2150 BTU cooling capacity at 95°F/95°F conditions, supporting energy-efficient operation under continuous load. Built with a durable steel housing, its wall-mount design enables secure installation on electrical enclosures. Capable of maintaining optimal airflow and consistent internal temperature regulation.
- Built-in condensate evaporation
- Digital programmable controller with display can be viewed inside the cabinet
- Default setting 95 F (adjustable between 68 F to 122 F)
- High temp alarm at 131 F
- Modbus RS485 interface
- Built-in heater
- Hermetically sealed
- Filter is aluminum mesh
- R134a refrigerant
- Cage clamp terminal connection
- Mounting flange hangers streamline installation
Specifications
- Housing Material: Gray RAL 7035 Powder Coated Steel
- Cooling Capacity 95F/95F: 2150 BTU
- Cooling Capacity 95F/122F: 1535 BTU
- Compressor: Rotary Piston Compressor
- Refrigerant / GWP: R134a / 1430
- Refrigerant Charge: 80 g / 2.8 oz
- High / Low Pressure: 406 / 88 PSI
- Temperature Range: -40 F - 140 F
- Air Volume Flow (system/unimpeded): Ambient: 140 / 240 cfm, Cabinet: 70 / 105 cfm
- Mounting: Wall Mounted
- Dimensions: 15" Height x 9.85" Width x 9.85" Depth
- Voltage / Frequency: 230 V ~ 50/60 Hz
- Current 95F/95F: 2.1 Amps (50 Hz) / 1.9 Amps (60 Hz)
- Starting Current: 6 Amps
- Max Current: 2.3 Amps
- Nominal Power 95F/95F: 411 W @ 50 Hz, 415 W @ 60 Hz
- Max Power: 540 Watts
- Fuse: 15 A (T)
- Max Current Ampacity: 15 Amps
- Short Circuit Current Rating: 5 kA
- Rated Current Compressor: 1.6 Amps
- Full Load Current Fans: 0.2 Amps
- Connection: 3 Conductor 18 AWG cable for power / 5 Conductor 20 AWG cable for signals / 3 pole connector for RS485
- Protection Category: IP 56 / Type 12, 3, 3R, 4
- Approvals: CE, C UL US, UL (ACVS)
Seifert Progressive Air Conditioner Downloads
|
|
|
 |
|
 |
|
