Industrial Cabinet Temperature Management
The Seifert 870615201 Progressive electrical cabinet air conditioner delivers 2,270 BTU of cooling at 95°F/95°F conditions using a 120V AC supply. The unit combines enclosure cooling with a 150W heater in a wall-mounted, powder-coated steel housing. Its digital programmable controller provides an adjustable temperature setpoint, while Modbus RS485 supports communication with compatible control systems.
Programmable Control and Communication
The digital programmable controller has a display visible from inside the cabinet. Its default setpoint is 95°F, adjustable from 68°F to 122°F. A high-temperature alarm activates at 131°F, and the Modbus RS485 interface supports communication with compatible industrial monitoring and control equipment.
Cooling System and Condensate Management
The cooling system uses a rotary piston compressor and R134a refrigerant in a hermetically sealed refrigeration circuit. Built-in condensate evaporation handles condensate generated during cooling. An aluminum mesh filter provides an accessible maintenance component. The integrated 150 W enclosure heater adds heating capability when the application requires it.
Features and Benefits
- Programmable temperature settings allow the cooling setpoint to match cabinet requirements.
- The high-temperature alarm identifies elevated cabinet temperature.
- Modbus RS485 provides a communication interface for compatible control systems.
- Built-in condensate evaporation supports condensate management.
- Mounting flange hangers assist with positioning during wall installation.
- Cage-clamp connections support field wiring, with model-specific power, signal, and RS485 connection arrangements.
Recommended Applications
Use the 870615201 for active cooling of industrial electrical enclosures where internally generated heat needs to be removed to maintain the required cabinet temperature. Recommended uses include machine-control cabinets and automation panels containing temperature-sensitive electronics. Match the cooling capacity to the enclosure heat load and operating conditions.
Cooling Capacity and Selection
Cooling capacity changes with temperature conditions. At 95°F/122°F conditions, this model provides 1810 BTU. Compare the capacity at the intended conditions with the cabinet heat load, and account for available mounting space, supply voltage, and the required protection category.
Installation and Maintenance Notes
- Verify the 120V AC supply and the frequency-specific current and power ratings in the technical specifications.
- Check enclosure wall space, mounting dimensions, and any specified cutout dimensions before preparing the installation.
- Provide access for the controller display, filter maintenance, and electrical connections.
- Keep the ambient and cabinet airflow paths clear, and follow the installation documentation for mounting and condensate management.
- Use the specified power, signal, and RS485 connections. Confirm the required IP56 / Type 12, 3, 3R, 4 protection category for the installed assembly.
Downloads and Technical Documentation
Seifert 870615201 User Manual
Seifert 870615201 Product Datasheet
