 |
Sealcon CF16GR-GY enlarged body gray nylon cord grip is liquid tight to 150 psi. PG 16 Thread, Accommodates .35" - .63" (9 - 16 mm) O.D cable. Sold Individually.
(Locking nut & O-Ring sold separately) Also known as Hummel #1.593.1600.15
|
Thread Size/Type
|
PG 16
|
- Nylon 6/6 Material with Buna-N Seal
- Submersible to 300 ft. / NEMA 4x & 6 (IP68 / IP 69 K)
- 150 psig (10 bar) Pressure Rating
- Flame Protected to UL 94
- Halogen and Phosphorous Free
- Resists salt water, acids, alkalis', gasoline & oils.
- Durable Rugged Construction
- RoHS & Deca BDE, CSA approval
|
|
Through Hole Dia.
|
.89" (22.5 mm)
|
|
Body Length
|
4.49" (114 mm)
|
|
Thread Length
|
.39" (10 mm)
|
|
Wrench Flat Dome/Body
|
1.3" (33 mm)
|
Sealcon PG 16 Nylon / Plastic strain relief fittings, also referred to as cord grips or cable glands, are used to help customers in all industries attach wire or cable to a wide variety of applications. This cord grip provides a NEMA 4x & 6 (IP 68 & 69K), 150 PSIG (10 bar) Liquid Tight Rating. Enlarged body cable glands are intended for applications in which the cable diameter increases, but the thread size stays the same. Trading out the standard or reduced inserts increases modularity. Sealcon patented overlapping clamping splines and recessed custom grommets keep your cable protected from damage and the elements. The CF16GR-GY fitting supplies a large amount of Pull-out resistance by applying concentric force on all points of the cable. Flex nut cord grips prevent kinking and chafing of the cable. Note: Contact us about purchasing individual standard or reduced inserts
Approvals
- RoHS Compliance
- Deca Bde Deca-Bromo-Diphenyl-Ether Compliance
- Registration, Evaluation, Authorization and Restriction of Chemicals
- Waste Electrical and Electronic Equipment Directive
- UL / CUL Listed
- UL Registered
- EAC
- CE
- German Lloyd
Sealcon CF16GR-GY Reduced Insert PG 16 Flex Cord Grip
|
|
|