 |
Sealcon CF07GA-BK enlarged body black nylon cord grip is designed for the toughest applications. Also known as Hummel 1.593.0701.14. Sold Individually.
Locking nut & O-Ring sold separately
Specifications
- Thread Size: PG 7 / 1/4" NPT
- Cable O.D. Range: .16" - .31" (4 - 8 mm)
- Through Hole Diameter: .49" (12.5 mm)
- Body Length: 2.48" (63 mm)
- Thread Length: .31" (8 mm)
- Wrench Flat Dome: .75" (19 mm)
- Wrench Flat Body: .75" (19 mm)
Features
- Nylon 6/6 Material with Buna-N Seal
- Submersible to 300 ft. / NEMA 4x & 6 (IP68 / IP 69 K)
- 150 psig (10 bar) Pressure Rating
- Flame Protected to UL 94
- Halogen and Phosphorous Free
- Resists salt water, acids, alkalis', gasoline & oils.
- Durable Rugged Construction
- RoHS & Deca BDE, CSA approval
Approvals
- RoHS Compliance
- Deca Bde Deca-Bromo-Diphenyl-Ether Compliance
- Registration, Evaluation, Authorization and Restriction of Chemicals
- Waste Electrical and Electronic Equipment Directive
- UL / CUL Listed
- UL Registered
- EAC
- CE
- German Lloyd
- V0 UL94 Rated / Approved
Sealcon PG 7 / 1/4" NPT Nylon / Plastic cable glands, also known as strain relief fittings or cord grips, are used to help customers in all industries connect their cable or wire to their applications. This fitting provides a NEMA 4x & 6 (IP 68 & 69K), 150 PSIG (10 bar) Liquid Tight Rating. Enlarged body cable glands are designed for use when the cable diameter increases, but the thread size stays the same. Switching out the standard or reduced inserts increases flexibility. Sealcon patented overlapping clamping splines, recessed custom grommets help protect your cable from damage and the elements. The CF07GA-BK fitting supplies a large amount of Pull-out resistance by applying an even force on all points of the cable. Flex nut strain relief fittings help prevent kinking and chafing of the cable.
Note: Contact us about purchasing individual standard or reduced inserts
|
|
|
