 |
Sealcon CF07GR-GY enlarged body gray nylon cord grip is liquid tight to 150 psi. PG 7 / 1/4" NPT Thread, Accommodates .08" - .24" (2 - 6 mm) O.D cable. Sold Individually.
(Locking nut & O-Ring sold separately) Also known as Hummel #1.593.0700.15
|
Thread Size/Type
|
PG 7 / 1/4" NPT
|
- Nylon 6/6 Material with Buna-N Seal
- Submersible to 300 ft. / NEMA 4x & 6 (IP68 / IP 69 K)
- 150 psig (10 bar) Pressure Rating
- Flame Protected to UL 94
- Halogen and Phosphorous Free
- Resists salt water, acids, alkalis', gasoline & oils.
- Durable Rugged Construction
- RoHS & Deca BDE, CSA approval
|
|
Through Hole Dia.
|
.49" (12.5 mm)
|
|
Body Length
|
2.48" (63 mm)
|
|
Thread Length
|
.31" (8 mm)
|
|
Wrench Flat Dome/Body
|
.75" (19 mm)
|
Sealcon PG 7 / 1/4" NPT Nylon / Plastic cord grips, otherwise known as strain relief fittings or cable glands, are used to assist customers in nearly any industry when attaching cable or wire to different applications. This fitting provides a NEMA 4x & 6 (IP 68 & 69K), 150 PSIG (10 bar) Liquid Tight Rating. Enlarged body cable glands are made for use when the cable diameter increases, but the thread size stays the same. Trade out the standard or reduced inserts to increase flexibility. Sealcon patented overlapping clamping splines, recessed custom grommets help protect your cable from damage and the elements. The CF07GR-GY cord grip provides a large amount of Pull-out resistance by applying even force on all points of the cable. Flex nut fittings help prevent kinking and chafing of the cable. Note: Contact us about purchasing individual standard or reduced inserts
Approvals
- RoHS Compliance
- Deca Bde Deca-Bromo-Diphenyl-Ether Compliance
- Registration, Evaluation, Authorization and Restriction of Chemicals
- Waste Electrical and Electronic Equipment Directive
- UL / CUL Listed
- UL Registered
- EAC
- CE
- German Lloyd
CF07GR-GY Sealcon PG 7 Flex Strain Relief Fitting
|
|
|
