Sealcon CD07AW-BR Nickel Plated Brass PG 7 2-4.5 mm Dome Cable Gland

Sealcon CD07AW-BR Mini WADI Nickel-Plated Brass PG 7 Cord Grip

A compact Mini WADI PG 7 cord grip for 0.08" to 0.18" cable. Its short body is designed for cable entries where installation space is limited.

Why Choose the Sealcon CD07AW-BR Cord Grip?

The Sealcon CD07AW-BR, also known as Hummel 1.112.0708.01, is a high-quality Mini WADI nickel-plated brass PG 7 cord grip. It is sold individually and accommodates 0.08"–0.18" (2–4.5 mm) cable.

The compact design fits applications where space is at a premium. It is especially practical around small sensors, cameras, and switches and within compact fiber-optic or appliance assemblies. A nickel-plated brass body and thermoplastic elastomer seal provide a rugged cable entry with NEMA 4X and IP68 protection.

🔩 PG 7 Thread

Confirm the equipment entry matches this thread size and type

📏 0.08"–0.18" (2–4.5 mm) Cable Range

Match the cable outside diameter to the specified clamping range

🛡️ Rugged Material System

Nickel-plated brass body with thermoplastic elastomer seal

💧 Liquid-Tight Protection

NEMA 4X (IP68)

⚠️ Order the Required Mounting Hardware Separately

The locking nut and O-ring are sold separately. Confirm that both accessories match the PG 7 installation before ordering.

📋 Compact Mini WADI Design

The 0.56" (14.3 mm) body length helps this cord grip fit confined spaces without giving up NEMA 4X and IP68 protection. It accommodates cables from 0.08" to 0.18" (2 to 4.5 mm).

Key Features & Benefits

Nickel Plated Brass body with Thermoplastic Elastomer seal
Operating temperature: -20°C to 100°C (-4°F to 212°F)
NEMA 4X (IP68)
70 psig (5 bar) pressure rating
Flame protection to UL 94
Halogen- and phosphorus-free
Resists salt water, acids, alkalis, gasoline, and oils
Durable, rugged construction
RoHS and Deca-BDE approval
Sold individually

Technical Specifications

Product Code	CD07AW-BR
Hummel Part Number	1.112.0708.01
Product Type	Mini WADI nickel-plated brass PG 7 cord grip
Body / Seal Material	Nickel-plated brass body with thermoplastic elastomer seal
Thread Size	PG 7
Cable O.D. Range	0.08"–0.18" (2–4.5 mm)
Through-Hole Diameter	0.49" (12.5 mm)
Body Length	0.56" (14.3 mm)
Thread Length	0.14" (3.5 mm)
Dome Wrench Flat	0.43" (11 mm)
Body Wrench Flat	0.59" (15 mm)

📋 Selection Checklist

1. Match the Thread: Confirm the equipment opening accepts PG 7.

2. Measure the Cable: Verify that the cable outside diameter falls within 0.08"–0.18" (2–4.5 mm).

3. Confirm the Material: Make sure nickel-plated brass body with thermoplastic elastomer seal is appropriate for the application.

4. Check the Protection Level: The fitting is rated NEMA 4X (IP68)

5. Verify the Pressure Rating: The stated pressure rating is 70 psig (5 bar).

📦 What's Included

• One Sealcon CD07AW-BR Mini WADI cord grip
• Thermoplastic elastomer seal

✅ Approvals & Compliance

• RoHS compliance
• Deca-BDE (decabromodiphenyl ether) compliance
• REACH compliance
• WEEE Directive compliance
• CE

🏷️ Product Identification

Sealcon Product Code: CD07AW-BR
Hummel Part Number: 1.112.0708.01
Product Names: Cord grip, strain relief fitting, or cable gland
Sales Unit: Sold individually