 |
Sealcon PG9 Nickel-Plated Brass Hazardous-Location Cable Gland, 2 x 3 mm Holes, ATEX / IECEx, IP68
This hazardous-location PG9 multi-hole cable gland seals two 3 mm cables through one enclosure entry. Its nickel-plated brass body and elastomer form seal are designed for Ex e increased-safety installations requiring ATEX, IECEx, IP68, and high-pressure environmental protection.
Why Choose the CD09A2-MX Cable Gland?
This hazardous-location PG9 multi-hole cable gland seals two 3 mm cables through one enclosure entry. Its nickel-plated brass body and elastomer form seal are designed for Ex e increased-safety installations requiring ATEX, IECEx, IP68, and high-pressure environmental protection.
The gland is rated for temperatures from -20°C to 95°C, pressure up to 150 psig (10 bar), and submersion to 300 ft when correctly installed. It carries hazardous-area markings for gas and dust environments and is suitable for Zone 1 and Zone 20 applications as indicated by its certification markings.
⚡ Hazardous Locations
Ex e increased-safety design for certified gas and dust applications
🔌 Two Cable Openings
Two 3 mm holes route a cable pair through one PG9 gland
🌊 IP68 to 300 ft
Submersible design is rated to 300 ft with correct fit and installation
🛡️ 150 psig Rating
Nickel-plated brass construction supports pressure up to 10 bar
⚠️ Hazardous-Area Selection and Cable Fit
Use only within the limits of the applicable equipment certification, installation standard, temperature range, and hazardous-area classification. This Ex e gland is not recommended for armored cable. Each cable should be at least 80% of the 3 mm hole diameter, and the cable-to-hole difference must not exceed 0.04 in. (1 mm). The locking nut is sold separately; product imagery may be representative.
📋 ATEX / IECEx Cable Entry
Certification markings include II 2G Ex eb IIC Gb for gas atmospheres and II 1D Ex ta IIIC Da for dust atmospheres, with Zone 1 (2G/Gb) and Zone 20 (1D/Da) classifications. Installation must follow the certified equipment documentation and all governing electrical codes.
Key Features & Benefits
- Ex e increased-safety cable-entry design
- IP68 / NEMA 6 protection with submersion rating to 300 ft
- Pressure rated to 150 psig (10 bar)
- Temperature range of -4°F to 203°F (-20°C to 95°C)
- UL 94 flame-protected, halogen-free, and phosphorus-free materials
- Approvals and conformity: RoHS, IECEx, UL 94, CE, ATEX, PCT, and Germanischer Lloyd
- Not recommended for armored cable
Technical Specifications
| Product Code | CD09A2-MX |
|---|
| Hummel Part Number | 1.687.0901.01 |
|---|
| Insert Part Number | 1.089.0901.19 |
|---|
| Product Type | Hazardous-location multi-hole cord grip |
|---|
| Body Material | Nickel-plated brass |
|---|
| Seal Material | Elastomer form seal |
|---|
| Thread Size | PG9 |
|---|
| Number of Holes | 2 |
|---|
| Hole Diameter | 0.12 in. (3 mm) each |
|---|
| Through-Hole Diameter | 0.60 in. (15 mm) |
|---|
| Body Length | 0.83 in. (21 mm) |
|---|
| Thread Length | 0.24 in. (6 mm) |
|---|
| Wrench Flats | 0.67 in. (17 mm) |
|---|
| Ingress Protection | IP68 / NEMA 6; submersible to 300 ft |
|---|
| Pressure Rating | 150 psig (10 bar) |
|---|
| Temperature Range | -4°F to 203°F (-20°C to 95°C) |
|---|
| Hazardous Markings | II 2G Ex eb IIC Gb; II 1D Ex ta IIIC Da |
|---|
| Quantity | Sold individually |
|---|
Installation & Selection Guidance
Confirm that the gland certification, Ex markings, thread, cable construction, cable diameter, enclosure certification, and ambient temperature meet the complete system requirements. Hazardous-location installation should be performed by qualified personnel in accordance with applicable codes.
What’s Included
Includes one nickel-plated brass PG9 hazardous-location cord grip with a two-hole elastomer insert. The locking nut is not included and is sold separately. Product imagery may show a representative configuration.
|
|
|
