 |
Sealcon CD07RS-BR: Nickel-Plated Brass Short-Thread Cable Gland, PG 7 / 1/4 in. NPT, 2–5 mm Cable
Nickel-plated brass liquid-tight strain-relief fitting with a compact 0.20 in. (5 mm) thread for 0.08–0.20 in. (2–5 mm) cable. The Nylon 6/6 splined bushing provides concentric clamping for industrial enclosures with limited mounting depth.
✅ Compact 5 mm Thread for Standard Panel Entries
Choose the CD07RS-BR when a nickel-plated brass PG 7 / 1/4 in. NPT cable gland must fit a panel entry with limited thread depth. The 0.20 in. (5 mm) thread is shorter than the elongated CD07CR versions, while the supported cable range remains 0.08–0.20 in. (2–5 mm).
Rugged Brass Strain Relief in a Compact Mounting Format
The Sealcon CD07RS-BR cable gland secures small-diameter cable entering control panels, machines, instrumentation housings, and outdoor enclosures. Nickel-plated brass construction provides durable mechanical protection, and the Nylon 6/6 splined bushing forms an even grip around the cable.
The self-locking ACME dome thread closes overlapping splines concentrically to retain the form seal and provide pull-out protection without damaging the jacket. Standard and reduced inserts can be exchanged to adapt the opening within the fitting's supported configuration.
📐 Short 5 mm Thread
Compact 0.20 in. thread length for entries with limited mounting depth
🛠️ Brass Construction
Nickel-plated brass body provides rugged industrial protection
💧 NEMA 4X/6
IP68/IP69K protection, 300 ft. submersion, and 150 psig rating
⚙️ Splined Bushing
Nylon 6/6 insert distributes strain-relief force around the cable
Key Features & Benefits
- Compact Entry Thread: 0.20 in. (5 mm) thread length suits limited-depth mounting
- Small-Cable Capacity: Fits 0.08–0.20 in. (2–5 mm) cable
- Nickel-Plated Brass Body: Provides durable mechanical protection
- Concentric Strain Relief: Overlapping splines improve cable retention without concentrated pressure
- Environmental Protection: Rated NEMA 4X and 6, IP68 and IP69K, and submersible to 300 ft.
- Pressure Rating: Rated to 150 psig (10 bar)
- Chemical Resistance: Resists salt water, acids, alkalis, gasoline, and oils
- Sold Individually: Locking nut is sold separately; O-ring is not included
Specifications
|
Part Number
|
CD07RS-BR
|
|
Brand
|
Sealcon
|
|
Alternate Part Number
|
Hummel 1.609.07.2015
|
|
Product Type
|
Short-thread cable gland / strain relief
|
|
Thread Size
|
PG 7 / 1/4 in. NPT
|
|
Cable O.D. Range
|
0.08–0.20 in. (2–5 mm)
|
|
Through-Hole Diameter
|
0.49 in. (12.5 mm)
|
|
Body Length
|
0.75 in. (19 mm)
|
|
Thread Length
|
0.20 in. (5 mm)
|
|
Wrench Flat — Dome
|
0.55 in. (14 mm)
|
|
Wrench Flat — Body
|
0.55 in. (14 mm)
|
|
Body Material
|
Nickel-plated brass
|
|
Bushing
|
Nylon 6/6 splined bushing
|
|
Environmental Ratings
|
NEMA 4X and 6; IP68 and IP69K; submersible to 300 ft.
|
|
Pressure Rating
|
150 psig (10 bar)
|
✅ Approvals & Compliance
- RoHS compliance
- Deca-BDE compliance
- REACH compliance
- WEEE compliance
- UL / cUL Listed
- UL Registered
- EAC
- CE
- German Lloyd
📏 Short-Thread Selection Check
Confirm a 0.08–0.20 in. (2–5 mm) cable O.D., PG 7 / 1/4 in. NPT thread, and sufficient engagement for the 0.20 in. (5 mm) thread length. Add the correct O-ring and locking nut when the installation requires them.
🔧 Installation Notes
Confirm thread engagement: Verify that the 5 mm thread length is appropriate for the panel or threaded entry.
Add the seal if required: This product does not include an O-ring; select one compatible with the entry and environment.
Tighten the dome: Close the splined bushing evenly around the cable without overtightening.
🏭 Typical Applications
Control panels with limited wall depth
Machine and instrumentation enclosures
Compact junction boxes
Outdoor or washdown cable entries
|
|
|
