 |
Sealcon EF25MR-GY high quality gray nylon snap elbow cord grip is designed for the toughest applications. Also known as Hummel 1.314.2500.51. Sold Individually.
Locking nut & O-Ring sold separately
Specifications
- Thread Size: M25 x 1.5
- Cable O.D. Range: .35" - .63" (9 - 16 mm)
- Through Hole Diameter: .98" (25 mm)
- Body Length: 6.14" (156 mm)
- Height: 1.57" (40 mm)
- Thread Length: .43" (11 mm)
- Wrench Flat Dome: 1.30" (33 mm)
- Wrench Flat Body: 1.30" (33 mm)
Features
- Nylon 6/6 Material with Buna-N Seal
- Submersible to 300 ft. / NEMA 4x & 6 (IP68 / IP 69 K)
- 150 psig (10 bar) Pressure Rating
- Flame Protected to UL 94
- Halogen and Phosphorous Free
- Resists salt water, acids, alkalis', gasoline & oils.
- Durable Rugged Construction
- RoHS & Deca BDE, CSA approval
Approvals
- RoHS Compliance
- Deca Bde Deca-Bromo-Diphenyl-Ether Compliance
- Registration, Evaluation, Authorization and Restriction of
Chemicals
- Waste Electrical and Electronic Equipment Directive
- UL / CUL Listed
- UL Registered
- EAC
- CE
- German Lloyd
Sealcon M25 x 1.5 Nylon / Plastic cable glands, cord grips, or strain relief fittings are used in many different industries when assisting customers in attaching wire or cable to their applications. This fitting can provide a NEMA 4x & 6 (IP 68 & 69K), 150 PSIG (10 bar) Liquid Tight Rating. The ACME thread on the flex top is self-locking, so the EF25MR-GY cable gland provides a substantial amount of Pull-out resistance by creating an even force on all points of the cable. To increase adaptability, change the cable opening size by swapping out the standard and reduced inserts. Using a flex nut will prevent the cable from kinking and chafing. Applications in which the available space is limited receive the most benefit from this cord grip.
Note: Contact us about purchasing individual standard or reduced inserts
Sealcon M25 Snap Elbow Flex Cable Gland EF25MR-GY
|
|
|