 |
Sealcon ED25MA-GY high quality gray nylon snap elbow cord grip is designed for the toughest applications. Also known as Hummel 1.313.2500.50. Sold Individually.
Locking nut & O-Ring sold separately
Specifications
- Thread Size: M25 x 1.5
- Cable O.D. Range: .51" - .71" (13 - 18 mm)
- Through Hole Diameter: .98" (25 mm)
- Body Length: 2.87" (73 mm)
- Height: 1.57" (40 mm)
- Thread Length: .43" (11 mm)
- Wrench Flat Dome: 1.30" (33 mm)
- Wrench Flat Body: 1.30" (33 mm)
Features
- Nylon 6/6 Material with Buna-N Seal
- Submersible to 300 ft. / NEMA 4x & 6 (IP68 / IP 69 K)
- 150 psig (10 bar) Pressure Rating
- Flame Protected to UL 94
- Halogen and Phosphorous Free
- Vibration Resistant Dome
- Resists salt water, acids, alkalis', gasoline & oils.
- Durable Rugged Construction
- RoHS & Deca BDE, CSA approval
Approvals
- RoHS Compliance
- Deca Bde Deca-Bromo-Diphenyl-Ether Compliance
- Registration, Evaluation, Authorization and Restriction of
Chemicals
- Waste Electrical and Electronic Equipment Directive
- UL / CUL Listed
- UL Registered
- EAC
- CE
- German Lloyd
- VDE
Sealcon M25 x 1.5 metric Nylon / Plastic cable glands, strain relief fittings, and cord grips, are used to help customers in many industries when connecting cable or wire to their different applications. This cord grip can provide a NEMA 4x & 6 (IP 68 & 69K), 150 PSIG (10 bar) Liquid Tight Rating. The ACME thread on the dome top is self-locking, so the ED25MA-GY cable gland applies a substantial amount of Pull-out resistance by providing a concentric force on all points of the cable. The cable opening size can be increased or decreased by swapping out the standard and reduced inserts, increasing modularity. This strain relief fitting is perfect for applications where the available space is limited.
Note: Contact us about purchasing individual standard or reduced inserts
|
|
|
