 |
Sealcon CF17MA-BR high quality nickel plated brass cord grips are designed for the toughest applications. Also known as Hummel 1.623.1611.50. Sold Individually.
Locking nut sold separately
Specifications
- Thread Size: M16 x 1.5
- Cable O.D. Range: .20" - .39" (5 - 10 mm)
- Through Hole Diameter: .63" (16 mm)
- Body Length: 3.03" (77 mm)
- Thread Length: .24" (6 mm)
- Wrench Flat Dome: .79" (20 mm)
- Wrench Flat Body: .79" (20 mm)
Features
- Nickel Plated Brass Material with Stainless Steel Spring, Buna-N Seal & Nylon 6/6 Splined Bushing
- Submersible to 300 ft. / NEMA 4x & 6 (IP68 / IP69K)
- 150 psig (10 bar) Pressure Rating
- Flame Protected to UL 94
- Halogen and Phosphorous Free
- Resists salt water, acids, alkalis', gasoline & oils.
- Durable Rugged Construction
- RoHS & Deca BDE approval
Approvals
- RoHS Compliance
- Deca Bde Deca-Bromo-Diphenyl-Ether Compliance
- Waste Electrical and Electronic Equipment Directive
- UL / CUL Listed
- UL Registered
- EAC
- CE
- German Lloyd
- VDE
Sealcon M16 x 1.5 Metric Nickel Plated Brass Cord Grips, Strain Relief Fittings or Cable Glands are used in almost any industry and are made to attach cable or wire to various applications. This fitting carries a NEMA 4x & 6 (IP 68 & 69K), 150 PSIG (10 bar) Liquid Tight Rating. This Nickel Plated Brass Strain Relief with M16 x 1.5 Metric thread is made to meet the high standards required by your application. Modularity: The size of the cable opening on the strain relief can be increased or decreased simply by changing out the standard and reduced inserts. The ACME thread on the flex top is self locking and makes sure that the overlapping splines apply an even seal. This keeps the form seal from being pulled out of the fitting & provides pull-out protection for your cable so it does not cause damage. Cable kinking or chafing is eliminated by using the Flex Nut.
Note: Contact us about purchasing individual standard or reduced inserts
|
|
|
