 |
Sealcon CD21N7-BR high quality nickel plated brass cord grips are designed for the toughest applications. Also known as Hummel 1.697.3406.70 (insert Hummel 1.089.2106.19). Sold Individually.
Locking nut sold separately
Specifications
- Thread Size: 3/4" NPT
- Through Hole Diameter: 1.05" (26.7 mm)
- Body Length: .98" (25 mm)
- Thread Length: .51" (13 mm)
- Wrench Flat Dome: 1.18" (30 mm)
- Wrench Flat Body: 1.18" (30 mm)
- Number of Holes: 3
- Hole Diameter: .2" (5.2 mm)
Features
- Nickel Plated Brass Material with Buna-N Seal, Nylon 6/6 Splined Bushing & Buna-N O-Ring
- Rated IP 65 (NEMA 4x)
- Achieving IP 68 (NEMA 6) is possible, provided that there is an ideal fit
- Flame Protected to UL 94
- Halogen and Phosphorous Free
- Resists salt water, acids, alkalis', gasoline & oils.
- Durable Rugged Construction
- RoHS & Deca BDE, CSA approval
Approvals
- RoHS Compliance
- Deca Bde Deca-Bromo-Diphenyl-Ether Compliance
- Registration, Evaluation, Authorization and Restriction of
Chemicals
- Waste Electrical and Electronic Equipment Directive
- UL Registered
- CE
- German Lloyd
- PCT Approval
Sealcon 3/4" NPT Nickel Plated Brass Multi-hole Cable Glands, are also referred to as Strain Relief Fittings or Cord Grips. They are used in many industries to connect wire or cable to different applications. This cable gland is able to provide a NEMA 4x (IP 65) rating. The cable must not be less than 80% of the diameter of the hole to meet that rating. The difference between the cable's diameter and the hole's diameter also cannot be more than .04" (1 mm). The NEMA 6 (IP 68) submersible rating may be possible, but testing of the fitting may be required to confirm it. The ACME thread on the CD21N7BR dome top is self locking, with the overlapping splines creating an even seal and keeping the form seal from coming out of the fitting. It also provides pull-out protection for your cable so no damage is caused.
Hummel 1.697.3406.70 Brass Cable Gland
|
|
|