 |
Sealcon CD16N2-BR high quality nickel plated brass cord grips are designed for the toughest applications (insert Hummel 1.089.1601.19). Sold Individually.
Locking nut sold separately
Specifications
- Thread Size: 1/2" NPT
- Through Hole Diameter: .83" (21.1 mm)
- Body Length: 1.46" (37 mm)
- Thread Length: .51" (13 mm)
- Wrench Flat Dome: .94" (24 mm)
- Wrench Flat Body: .94" (24 mm)
- Number of Holes: 3
- Hole Diameter: .16" (4 mm)
Features
- Nickel Plated Brass Material with Buna-N Seal, Nylon 6/6 Splined Bushing & Buna-N O-Ring
- Rated IP 65 (NEMA 4x)
- Achieving IP 68 (NEMA 6) is possible, provided that there is an ideal fit
- -40 F to 212 F (-40 C to 100 C)
- Flame Protected to UL 94
- Halogen and Phosphorous Free
- Resists salt water, acids, alkalis', gasoline & oils.
- Durable Rugged Construction
- RoHS & Deca BDE, CSA approval
Approvals
- RoHS Compliance
- Deca Bde Deca-Bromo-Diphenyl-Ether Compliance
- Registration, Evaluation, Authorization and Restriction of
Chemicals
- Waste Electrical and Electronic Equipment Directive
- UL Registered
- CE
- German Lloyd
- PCT Approval
Sealcon 1/2" NPT Nickel Plated Brass Multi-hole Cord Grips, Cable Glands and Strain Relief Fittings are used to connect cable or wire to different applications and are found in many industries. This cord grip provides a NEMA 4x (IP 65) rating. The cable cannot be less than 80% of the diameter of the hole to achieve that rating. There also cannot be more than .04" (1 mm) of difference between cable's diameter and the diameter of the hole. To determine if the fitting meets the NEMA 6 (IP 68) submersible rating, testing may be required. The ACME thread on the CD16N2BR dome top is self locking, with the overlapping splines creating an even seal. This ensures that the form seal does not come out of the fitting. It also gives pull-out protection for your cable so it causes no damage.
Sealcon 1/2" NPT Nickel Plated Brass Cord Grip CD16N2-BR
|
|
|