 |
 |
 |
|
Saginaw SCE-806ELJ Single-Door Junction Enclosure: 8" H x 6" W x 4" D (203.2mm x 152.4mm x 101.6mm), NEMA 4 & IP66
Protect electrical components, instruments, and industrial controls in wet, oily, and hose-down environments. This 0.063-inch carbon steel enclosure features an ANSI-61 gray powder-coated finish, a continuously welded body, an oil-resistant gasket, and a secure quarter-turn latch.
✅ Built for Wet, Oily & Hose-Down Environments
The Saginaw Control & Engineering SCE-806ELJ is designed to house electrical components, instruments, and controls where moisture, oil, dirt, and routine washdown can threaten equipment reliability. Its 8" H x 6" W x 4" D (203.2mm x 152.4mm x 101.6mm) size supports compact industrial junction and control applications while providing environmental protection for demanding installations.
Reliable Carbon Steel Protection for Industrial Electrical Equipment
Constructed from 0.063-inch carbon steel, the SCE-806ELJ uses continuously welded seams that are ground smooth for a clean, durable enclosure body. A flange trough collar surrounds the door opening, helping direct liquids away from the gasketed seal during hose-down service and exposure to wet operating conditions.
The oil-resistant gasket, removable hinge, and 180-degree door opening support dependable protection and practical access during installation or maintenance. Ground studs on the door and body aid grounding continuity, while included mounting feet, a sealing washer, and hole plugs simplify installation. Sub-panel mounting standoffs are provided; the sub-panel is sold separately.
🛡️ Multi-Rating Protection
NEMA Type 3R, 4, 12, and 13 construction with UL, CSA, IEC 60529, and IP66 ratings
🔩 Welded Steel Body
0.063-inch carbon steel with continuously welded, ground-smooth seams for durable service
🚪 Full Door Access
Removable hinge and a door that opens 180 degrees for wiring, inspection, and maintenance
🧰 Installation Hardware
Mounting feet, sealing washer, hole plugs, and sub-panel standoffs are included
Key Features & Benefits
- Single-Door Junction Enclosure: Houses electrical components, instruments, and control equipment in industrial applications
- Carbon Steel Construction: 0.063-inch steel provides a strong enclosure body for dependable equipment protection
- ANSI-61 Gray Powder Coating: Provides a durable, uniform exterior finish
- Flange Trough Collar: Surrounds the door opening to support protection in wet and hose-down environments
- Oil-Resistant Gasket: Helps maintain the door seal where oil and moisture may be present
- Quarter-Turn Latch: Black mini quarter-turn latch, screwdriver operated
- Grounding Provisions: Ground studs are installed on both the door and enclosure body
- Sub-Panel Ready: Standoffs are included; the compatible sub-panel is sold separately
Specifications
| Part Number | SCE-806ELJ |
|---|
| Brand | Saginaw Control & Engineering |
|---|
| Series | Enviroline |
|---|
| Enclosure Type | Single-door junction enclosure |
|---|
| Material | 0.063-inch carbon steel |
|---|
| Finish | ANSI-61 gray powder coating |
|---|
| Dimensions | 8" H x 6" W x 4" D (203.2mm x 152.4mm x 101.6mm) |
|---|
| Door Opening | 180 degrees |
|---|
| Hinge | Removable hinge |
|---|
| Latch | Black mini quarter-turn latch, screwdriver operated |
|---|
| Gasket | Oil resistant |
|---|
| Environmental Ratings | NEMA Type 3R, 4, 12, and 13; UL Listed Type 3R, 4, and 12; CSA Type 3R, 4, and 12; IEC 60529; IP66 |
|---|
📦 Included with the Enclosure
• Mounting feet
• Sealing washer
• Hole plugs
• Standoffs for mounting a sub-panel
Sub-panel sold separately.
⚠️ Environmental Rating Instructions
Special instructions apply to IS3, IS4, and IS6 components to maintain the NEMA Type 3R environmental rating. Follow the instructions located on the enclosure door when installing these parts.
🔧 Installation & Access Notes
Latch operation: Use a screwdriver to operate the black mini quarter-turn latch.
Component mounting: Install a compatible sub-panel on the included standoffs when the application requires an internal mounting surface.
Grounding: Incorporate the door and body ground studs into the equipment grounding system as required by the installation.
|
|
|
 |
|
 |
|
