 |
 |
 |
|
Saginaw Control & Engineering SCE-12PBSSI is a 12 position push button enclosure. It is made from 0.063" 304 stainless steel with a #4 brushed finish and 22.5mm pushbutton entrances in a 3x4 configuration. Designed for keeping oil-tight push buttons, switches, and pilot lights protected in hose down applications or corrosive environments. (See link to applicable push buttons below)
- 11.75" H x 8.5" W x 3" D (298.45mm x 216mm x 76.2mm)
- Continuously welded seams
- Cover screws thread into sealed wells
- Accepts any brand of oil-tight push buttons, switches, or pilot lights
- 4 way standard push button entrances
- Removable cover
- Oil & water resistant gasket
- Welded mounting provision located on the back at the top and bottom
- IS5 industry standards - NEMA Type 4, 4x, 12 and Type 13, UL Listed Type 4, 4x, and 12, CSA Type 4, 4x, and 12, IEC 60529, IP 66
|
|
|
 |
|
 |
|
