 |
 |
 |
|
Saginaw SCE-10086FG Fiberglass Screw Cover Enclosure, 11.38 x 9.38 x 5.08 in.
Protect electronic components in corrosive environments and hose down applications. This fiberglass reinforced polyester enclosure uses captive screw fasteners and a continuous memory retaining gasket.
✅ Application Guide
Use this fiberglass enclosure to house electronic controls near washdown equipment or in corrosive work areas. Select a compatible subpanel to support the intended component arrangement.
Fiberglass Housing for Corrosive Locations
The Saginaw Control & Engineering SCE-10086FG screw cover enclosure provides a nonmetallic housing for electronic components exposed to corrosive conditions. Its fiberglass reinforced compression molded polyester construction is suited to hose down applications where dirt and moisture must be kept away from the installed equipment.
The enclosure measures 11.38" H x 9.38" W x 5.08" D. Captive screw fasteners secure the cover, while a continuous stainless steel hinge supports access to the interior. Built in panel mounting inserts accommodate a separately purchased subpanel.
Key Features & Benefits
- Continuous memory retaining gasket
- Molded mounting strips
- Captive screw fasteners
- Continuous stainless steel hinge
- Built in panel mount inserts
Specifications
|
Part Number
|
SCE-10086FG
|
|
Brand
|
Saginaw Control & Engineering
|
|
Enclosure Type
|
Screw cover enclosure
|
|
Dimensions (H x W x D)
|
11.38" x 9.38" x 5.08"
|
|
Metric Dimensions (H x W x D)
|
289.052 x 238.252 x 129.032 mm
|
|
Material
|
Fiberglass reinforced compression molded polyester
|
|
Closure
|
Captive screw fasteners
|
|
Gasket
|
Continuous memory retaining gasket
|
|
Subpanel
|
Sold separately
|
|
Industry Standard Group
|
IS5
|
|
NEMA Types
|
4, 4X, 12, 13
|
|
UL Listed Types
|
4, 4X, 12
|
|
CSA Types
|
4, 4X, 12
|
|
Ingress Protection
|
IP66
|
|
IEC Standard
|
IEC 60529
|
📦 Enclosure and Mounting Provisions
One SCE-10086FG enclosure with molded mounting strips and built in panel mounting inserts. The subpanel is sold separately.
🔧 Installation Notes
Use the molded mounting strips to mount the enclosure. Plan component placement on a compatible subpanel, available separately, using the built in panel mounting inserts.
|
|
|
 |
|
 |
|
