Saginaw Control & Engineering SCE-10PBX is a 10 position extra deep push button enclosure. It is made from 0.063" carbon steel with an ANSI-61 gray powder coating and 30.5mm pushbutton entrances in a 2x5 layout. Useful for keeping oil-tight push buttons, switches, and pilot lights protected from dirt & moisture.

• 14" H x 6.25" W x 4.75" D (355.6mm x 158.75mm x 120.65mm)
• Continuously welded seams
• Cover screws thread into sealed wells
• Works with any brand of oil-tight push buttons, switches, or pilot lights
• 4 way standard push button entrance
• Oil / water resistant gasket
• Welded mounting plates located on the back at the top and bottom
• IS2 industry standards - NEMA Type 4, 12 and Type 13, UL Listed Type 4 and 12, CSA Type 4 and 12, IEC 60529, IP 66

Saginaw 10 Position 30.5mm Steel Push Button Box SCE-10PBX