Home > Panel Meters > PAX2 1/8 DIN Dual Line Intelligent Panel Meters >

Red Lion PAX2S000 Strain Gage Meter

Red Lion Strain Gage Meter
Red Lion PAX2S000 Strain Gage Meter

Alternative Views:

Price: $601.00
Note: Call 800-966-2345 for Lead Time
MFG: Red Lion
Weight (lbs): 0.5

In Stock
Product Code: PAX2S000


The Red Lion PAX2S000 PAX2 series strain gage panel meter has a 2 line, 6/9 digit, Red/Green/Orange LCD display with 1/8 DIN housing. Features built in Modbus communications and a meter update rate up to 160 readings/second. AC/DC powered. It's perfect for applications that require dual visual parameters. It has the ability to indicate input, gross, tare, total, minimum, maximum, or setpoints on the display. Strain gage input can be attached to load cell, strain gage, or pressure sensors. One type of panel meter is then able to be used for different purposes.


  • Universal Power Supply - 50 to 250 VAC or 21.6 to 250 VDC
  • Dual Line, 6/9 Digit Red/Green/Orange LCD Display
  • Meter Update Rate Up to 160/Second
  • Built-In Modbus Communications
  • Communications - R232, RS-485, DeviceNet and Profibus (W/Option Card)
  • Setpoints - Dual & Quad Relay; Quad Sinking & Sourcing (w/Option card)
  • Retransmitted Analog Output (w/Option card)
  • Built-In USB Port
  • 24 Bit Resolution A/D Converter
  • NEMA 4X/IP65 - Front Panel

Red Lion PAX2S User Manual

Red Lion PAX2D Installation Instructions


Positive Image LCD
Top Line: Six 0.71" digits (Red/Green/Orange), Display Range: -199,999 to 999,999
Lower Line: Nine 0.35" digits (Green), Display Range: -199,999,999 to 999,999,999
Annunciators (Red): 1, 2, 3, & 4
Unit Label: programmable
Power Requirements
AC Power: 50 to 250 VAC, 50/60 Hz, 20 VA
DC Power: 21.6 to 250 VDC, 8 W
Sensor Power
+18 VDC, +/-5% @ 60 mA max., short circuit protected
Nonvolatile memory retains programmable parameters & display values
Input Capabilities
Connection Type: 4-wire bridge (differential) or 2-wire bridge (single-ended)
Range: Selectable for +/-24 mVDC or +/-240 mVDC
Excitation Power
Jumper Selectable: +5VDC @ 65mADC, +/- 2%, +10VDC @ 125mADC, +/- 2%
Custom Linearization
Data Point Pairs: Selectable from 2 to 16
Display Range: -199,999 to 999,999
Decimal Point: 0 to 0.0000
Time Base: second, minute, hour or day
Batch: Can accumulate (gate) input display from a user input
Time Accuracy: 0.01% typical
Decimal Point: 0 to 0.0000
Scale Factor: 0.001 to 65.000
Low Signal Cut-out: -199,999 to 999,999
Total: 6 digits on Line 1; 9 digits on Line 2
Standards Compliance
CE Approved
EN 61326-1 Immunity to Industrial Locations
Emission CISPR 11 Class A
IEC/EN 61010-1
RoHS Compliant
UL Listed: File #E179259
Type 4X Indoor Enclosure rating (Face only)
IP65 Enclosure rating (Face only)
IP20 Enclosure rating (Rear of unit)
Operating Temperature: 0 C to 50 C (32 F to 122 F)
Storage Temperature: -40 C to 60 C (-40 F to 140 F)
Humidity: 85% max. relative humidity (non-condensing)
Altitude: Up to 2000 meters
Construction: NEMA 4X/IP65 indoor use, IP20 Touch Safe, Installation Category II,
Pollution Degree 2, One piece bezel/case; flame resistant; Synthetic rubber keypad; panel gasket & mounting clip
Connection: High Compression Cage-Clamp Terminal Block
Dimensions: 1.95" x 3.8" x 4.24"

PAX2S000 Strain Gage Meter

Additional Product Information

The LCD display has a 6 digit, 0.7" top line that can be adjusted to display in red, green, or orange. Colors on the display can be configured to change with certain setpoints, to give a quick indication of the current status. The lower line shows a 9 digit, 0.35" display with a green readout. Either line is able to show the same types of parameters. The LCD display also features a 3 digit indicator that can be programmed to show a specific unit. There are 4 keys on the front panel, with 2 of them being programmable function keys.

PAX2S000 Data Sheet

Panel Meter Comparison Chart