 |
 |
 |
 |
The Red Lion PAX2D000 PAX2 series panel meter is a universal digital input panel meter. It features a 2 line, 6/9 digit, Red/Green/Orange LCD display with 1/8 DIN housing. Features built in Modbus communications and a meter update rate up to 160 readings/second. AC/DC powered. It's ideal for applications that need dual visual parameters, such as two counts, two rates, or one of each. Inputs can come from such sources as sensors, switches, pulse generators, and transistors. In this way one type of panel meter can be used for different functions.
Features
- Count, Dual Counter with Math Functions
- Rate, Dual Rate with Math Functions
- Universal Power Supply - 50 to 250 VAC or 21.6 to 250 VDC
- Dual Line, 6/9 Digit Red/Green/Orange LCD Display
- Variable Contrast & Intensity
- Meter Update Rate Up to 160/Second
- Built-In Modbus Communications
- Communications - R232, RS-485, DeviceNet and Profibus (W/Option Card)
- Setpoint & Analog Outputs (w/Option Card)
- Setpoints - Dual & Quad Relay; Quad Sinking & Sourcing
- Built-In USB/Virtual Communication Port
- Retransmitted Analog Output
- NEMA 4X/IP65 - Front Panel
Red Lion PAX2D User Manual
Red Lion PAX2D Installation Instructions
Specifications
Display Negative Image LCD Top Line: Six 0.71" digits (Red/Green/Orange), Display Range - 199,999 to 999,999 Lower Line: Nine 0.35" digits (Green), Display Range - 199,999,999 to 999,999,999 Annunciators (Red): 1, 2, 3, & 4 Unit Label: programmable Power Requirements AC Power: 50 to 250 VAC, 50/60 Hz, 20 VA DC Power: 21.6 to 250 VDC, 8 W Sensor Power +18 VDC, +/-5% @ 60 mA max., short circuit protected Memory Nonvolatile memory retains programmable parameters & display values Input Capabilities Accepts input from many sources such as switch contacts, TTL outputs, magnetic pickups and all standard RLC sensors. Inputs accept current sinking or current sourcing outputs and give selectable filtering for low frequency signals or switch contact debounce.
Counter Displays 6-digit (top line) or 9-digit (bottom line) Top Line Display Range: -199,999 to 999,999 Bottom Line Display Range: -199,999,999 to 999,999,999 Over Range Display: OUEr Under Range Display: UndEr Display Designators: CtA, Ctb, CtC (top line), A, b, C (bottom line) Maximum Count Rates: 50% duty cycle, count mode dependent If setpoints disabled: 35 KHz for all modes except Quadrature x4 (32 KHz) If setpoint(s) enabled: 20 KHz for any mode except Quadrature
x1 (19 KHz), Quadrature x2 (17 KHz) and Quadrature x4 (10 KHz) Rate Displays 6-digit (top or bottom line) Rate A or Rate B Display Range: 0 to 999,999 Rate C, Rate Max (High) or Min (Low) Display Range: -199,999 to 999,999 Over Range Display: OUEr Under Range Display: UndEr Display Designators: RtA, Rtb, RtC, Hi, Lo (top or bottom line) Maximum Frequency: 50 KHz Minimum Frequency: 0.001 Hz Display Update Time: 0.1 to 999.9 seconds Accuracy: +/-0.01% Standards Compliance CE Approved EN 61326-1 Immunity to Industrial Locations Emission CISPR 11 Class A IEC/EN 61010-1 RoHS Compliant UL Listed: File #E179259 Type 4X Indoor Enclosure rating (Face only) IP65 Enclosure rating (Face only) IP20 Enclosure rating (Rear of unit) Physical Operating Temperature: 0 C to 50 C (32 F to 122 F) Storage Temperature: -40 C to 60 C (-40 F to 140 F) Humidity: 85% max. relative humidity (non-condensing) Construction: NEMA 4X/IP65 indoor use, IP20 Touch Safe, Installation Category II, Pollution Degree 2, One piece bezel/case; flame resistant; Synthetic rubber keypad; panel gasket & mounting clip Connection: High Compression Cage-Clamp Terminal Block Dimensions: 1.95" x 3.8" x 4.24"
PAX2D000 Universal Digital Input Panel Meter
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Additional Product Information
The LCD display has a 6 digit, 0.7" top line that can be adjusted to display in red, green, or orange. Colors on the display can be set to change with certain setpoints, to give a quick indication of the current status. The lower line shows a 9 digit, 0.35" display with a green readout. Either line is able to show Counters A, B, or C, Rate A, B, or C, or Hi and Lo values. The LCD display also features a 3 digit indicator that can be programmed to show a specific unit. There are 4 keys on the front panel, with 2 of them being programmable function keys.
|
|
 |
 |
 |
 |

|