Home > Panel Meters > C48 1/16 DIN Counters & Timers >

Red Lion C48CB105 Panel Meter, Batch Counter, AC, 3 NPN OC Outputs, RS-485

Red Lion C48CB105 Panel Meter
Red Lion C48CB105 Panel Meter, Batch Counter, AC, 3 NPN OC Outputs, RS-485
 
Alternative Views:
Price: $368.00
Note: Please call or email [email protected] for alternatives
MFG P/N: C48CB105
MFG: Red Lion
Weight (lbs): 0.38

Quantity in Stock :(Out of Stock)


Availability: Out of Stock
Product Code: C48CB105
Qty:

Description
 

The Red Lion C48CB105 C48 series panel meter is a batch counter with 3 NPN OC outputs. It features a 2 line, 6 digit, transmissive LCD display with backlighting and a 1/16 DIN housing. The main process counter has dual presets and the second counter has one preset. The second counter can be utilized as a batch or total counter. The backlit display shows a red readout on the main line and a green readout on the secondary line. It is also resistant to noise interference, making it perfect for industrial use. AC powered.

Features

  • Three Presets
  • Bi-directional & Quadrature Counting
  • Dual Line, 6 Digit Transmissive LCD Display w/Backlighting
  • Red Top Line & Green Lower Line
  • 3 NPN OC Outputs
  • Up to 11KHz
  • NEMA 4X/IP65 - Front Panel
  • RS-485 Communications Capability
  • Status Indicators for Outputs
  • Programmable User Inputs
  • Function Keys on Front Panel
  • Housing is Lightweight & Withstands Impact
  • Several Can Be Stacked Horizontally or Vertically

Red Lion C48C Series User Manual

Specifications

Display
 Main Display: 0.3" digits
Secondary Display: 0.2" digits
Annunciators: Value- PRS, 1, 2, & 3; Output- 01, 02, 03
Power Requirements
AC Power: 85-250 VAC, 50/60 Hz, 9 VA max
DC Power: 11-14 VDC @ 150 mA max
Memory
Nonvolatile E2PROM retains all programmable parameters and count values
Sensor Power
+12 VDC (+/- 15%) @100 mA max
Count Inputs A & B
Current Sourcing: 3.9KOhm pull-down, VIN max = 30 VDC
Current Sinking: 7.8KOhm pull-up to 12 VDC; ISNK = 1.8 mA max
Debounce: 50 Hz max
Lo Bias: VIL = 1.5 VDC max., VIH = 3.75 VDC min.
Hi Bias: VIL = 5.5 VDC max., VIH = 7.5 VDC min
User Inputs
Current Sinking: VIL = 1.5 VDC max, 22 KOhm pull-up to 5 VDC
Current Sourcing: VIH = 3.5 VDC min., VIN max = 30 VDC; 22 KOhm pulldown
Response Time: 10 msec max.
Inhibit Response Time: 250 usec max.
Outputs
Solid State: NPN Open Collector- ISNK = 100 mA max. @ VOL = 1.1 VDC max.; VOH = 30 VDC max.
Standards Compliance
UL & CUL Recognized
Electrostatic Discharge: EN 61000-4-2
Electromagnetic RF Fields: EN 61000-4-3
Fast Transients (burst): EN 61000-4-4
RF Conducted Interference: EN 61000-4-6
Simulation of Cordless Phone: ENV 50204
RF Interference: EN 55011
Physical
Operating Temperature: 0 C to 50 C (32 F to 122 F)
Storage Temperature: -40 C to 70 C (-40 F to 158 F)
Humidity: 85% max. relative humidity (non-condensing) from 0 C to 50 C.
Altitude: Up to 2000 meters
Housing: Black Plastic
Electrical Connection: Wire clamping screw terminals
Dimensions: 1.95" x 1.95" x 4.54"
RS-485 Serial Communications
Baud Rate: Programmable from 1200 to 9600 baud
Address: Programmable from 0 to 99
Data Format: 10 Bit Frame, 1 start bit, 7 or 8 data bits, 1 or No Parity bit, & 1 stop bit
Parity: Programmable for Odd (7 data bits), Even (7 data bits), or None (8 data bits)

Red Lion C48CB105 Batch Counter Panel Meter

Additional Product Information

There are nine programmable counting modes & the unit can be programmed to register counts on both edges of the input signal. Programming modes & data values, changing the display, and resetting can all be done through the controls on the front. User inputs can be sinking (active low) or sourcing (active high) through a single plug jumper. It features three solid-state NPN current sinking, open collector outputs. Output 1 and Output 2 are for the primary process counter, while Output 3 is for the secondary batch or total counter. Two way communication with a printer, computer, or other device is possible with the optional RS-485 serial communication interface.

Panel Meter Comparison Chart