 |
 |
 |
|
The Red Lion N-TRON ® Series NT24K-12SFP-DM4 is a fully managed gigabit capable Industrial Ethernet Switch. Housed in a metal DIN-Rail enclosure, if features eight 10/100/1000BaseTX copper ports and four dual mode 100/1000Base SFP fiber ports (transceivers sold separately). Configured w/ N-View OPC monitoring, N-Ring network communication, & management features. Perfect for industrial uses, such as alternative energy, transportation, water & wastewater treatment plants, oil & gas, and manufacturing.
PRODUCT FEATURES
- (8) 10/100/1000BaseTX RJ45 Copper Ports
- (4) 100/1000 Dual Mode SFP Fiber Ports (Transceivers Sold Separately - see below)
- -40 F to 185 F Operating Temperature
- ESD and Surge Protection on all Built-in Ports
- Auto Sensing 10/100/1000BaseTX, Duplex, and MDIX
- Onboard Temperature Sensor
- Store-and-forward Technology
- Redundant Power Input (10-49 VDC)
- Jumbo Frame Support
- 16k MAC Addresses
- Detailed Ring Map and Fault Location Charting
- USB Configuration Port
- Configurable Alarm Contact
- LED Status Indicators
- Space Saving DIN-Rail Enclosure
- SNMP v1, v2, v3 and Web Browser Management
- SSH/SSL/HTTPS
- IEEE 802.1x with RADIUS Remote Server Authentication
- DHCP Server, Option 82 relay, Option 61, IP fallback
- Port Security – MAC address based
- Multi-Member N-Ring™ Technology with ~30ms Healing
- N-Link™ Redundant Ring Technology
- N-View™ Monitoring Technology
- EtherNet/IP™ CIP Messaging
- 802.1AB-2005 LLDP (Link Layer Discovery Protocol)
- Web configuration
- IGMP Auto Configuration
- 802.1Q tag VLAN and Port VLAN
- 802.1p QoS and Port QoS
- Port Trunking
- Port Mirroring
- SNTP
- Event Log/Syslog
- 802.1d, 802.1w, 802.1D RSTP
- 3 Year Manufacturer's Warranty
Red Lion N-Tron Series NT24K-12SFP-DM4 Downloads
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Additional Product Information
Switch Properties
Number of MAC Addresses: 16K
IEEE Compliance: 802.3, 802.3u, 802.3ab, 802.3x, 802.1d/D/w, 802.1p, 802.1Q, 802.1x
Latency (Typical): 1.6 μs
Switching Method: Store-and-Forward
Maximum Throughput: Up to 24 Gb/s
Communications: Full Wire Speed
MTBF: >2 million hours
Physical
Height: 5.88” (14.92 cm)
Width: 3.1” (7.87 cm)
Depth: 5.54” (14.07 cm)
Weight (maximum): 1.91 lbs (0.87 kg)
Mount: 35mm DIN-Rail
Power Input
Input Voltage: 10-49 VDC
Steady Input Current: 760 mA @ 24 VDC
Inrush: 20.4 A / .3 ms @ 24 VDC
BTU/hr: 62.26
Environmental
Operating Temperature: -40° C to 85° C (-40 F to 185 F)
Operating Humidity: 10% to 95% (Non Condensing)
Operating Altitude: 0 to 10,000 ft.
Shock: 200g @ 10ms
Vibration: 50g, 5-20 Hz, triaxial
Recommended Wiring Clearance
Front and Top: 4” (10.2 cm)
Network Media
10BaseT: ≥Cat3 cable
100BaseTX: ≥Cat5 cable
1000BaseT: ≥Cat5e cable
100BaseFX, 1000BaseSX Multimode: 50-62.5/125μm
100BaseFX, 1000BaseLX Singlemode: 7-10/125μm
10/100/1000BaseT: Eight (8) RJ-45 ports 1000BaseT SFP: Up to four (4) RJ-45 copper ports
100BaseFX SFP: Up to four (4) LC fiber ports
1000BaseSX/LX SFP: Up to four (4) LC fiber ports
Configuration Port: One (1) USB Type B Product Safety: ANSI/ISA 12.12.01-2013 Class I and II, Div. 2 and Class III, Div. 1 and 2, Groups A, B, C and D Hazardous LocationsUL508 Industrial Control Equipment
CAN/CSA-C22.2 No. 213-M1987 Class I Div. 2 Hazardous Locations
CAN/CSA-C22.2 No. 14-M1987 Industrial Control Equipment
Emissions: FCC Title 47, Part 15, Radio Frequency Devices, Subpart B ANSI C63.4-2009; Industry Canada ICES-003, EN 55011; EN 61000-6-4, EN 61000-3-2, EN61000-3-3, EN 55032
Immunity: EN 55024, EN 61000-6-2; IEC 61000-4-2 (ESD); IEC 61000-4-3 (RFAM); IEC 61000-4-4 (EFT); IEC 61000-4-5 (SURGE); IEC 61000-4-6 (RFCM); IEC 61000-4-8 (PFMF); IEC 61000-4-11 (VDI)
Rail: EN 50155, EN 50121 and EN 61373
IEEE 1613 (Electric Utility Substations), NEMA TS1/TS2 (Traffic Control)
Other: ABS Type Approval for Shipboard Applications; EMC Directive 2014/30/EU; LV Directive 2014/35/EU GOST-R, RoHS Compliant
|
|
|
|
|
|
|
