Mencom PG21-4X6.5 four hole insert for select PG 21, 3/4" NPT, or M25 strain relief fittings. Hole diameter 0.256" (6.5 mm). One cord grip can then be used for multiple wires or cables. Wire and cable diameters should be within 0.02" of the hole diameter for an ideal fit. Sold Individually. Note: Image is for reference, actual part may differ

Specifications

Thread Size / Type- 3/4" NPT, PG 21, M25
Number of Holes- 4
Hole Diameter- 0.256" (6.5 mm)
Dimensions- 0.864" Diameter x 0.383" Height
Material- Black Plastic
IP Rating- IP 65 (provided there is an ideal fit)

Fits

MCG-21
MCG-21R
PCG-21-B
PCG-21R
PCG-21R-B
PCG-3/4
PCG-3/4-B
PCG-3/4-R
PCG-3/4R-B
PCG-M25
PCG-M25-B
PCG-M25R
PCG-M25R-B

Mencom PG 21, 3/4" NPT, & M25 4 Hole 6.5 mm Strain Relief Fitting Insert

	Hirschmann 942170012 BRS20-8TX-EEC 8 Port Managed Ethernet Switch, Extended Temperature Range $1,672.85
	Mencom MDC-5FP-3M-R M12 Cordset, 5 Pole Female Right Angle Connector, 3 Meter Cable $25.07
	Macromatic COH50A1BC Over Current Sensing Relay, 5-50A, 0.5-50 Sec, 240V $89.02
	Menics PWE-3FF-RYG 3 Stack LED Tower Light, Red Yellow Green, Steady, 90-240V, White $155.23
	Menics MT5C1AL-G 1 Stack 56mm Tower Light, Green, 24V, Steady & Flashing $44.53
	Mencom MDC-3MR-2 M12 Receptacle, 3 Pole, Male Straight, 4A, 1/2" NPT $12.53

Mencom PG21-4X6.5 PG 21, 3/4" NPT, & M25 4 Hole 0.256" (6.5 mm) Insert

Mencom PG 21, 3/4" NPT, & M25 4 Hole 6.5 mm Strain Relief Fitting Insert