Menics PME-302-RYG 3 Stack LED Tower Light, 45mm Dia., 24V

Menics PME-302-RYG 3-Tier Red, Yellow, and Green 24V LED Tower Light

Preassembled 45 mm modular signal tower with steady red, yellow, and green LED illumination, prism-cut lenses, a 25-inch wire lead, vibration-absorbing construction, and IP52 protection.

Why Choose the Menics PME-302-RYG LED Tower Light?

The Menics PME-302-RYG is a 3-stack, 45 mm LED signal tower designed to provide clear visual machine-status indication from a compact footprint. Its steady red, yellow, and green lenses help operators identify operating conditions quickly on control panels, production equipment, and automated machinery.

Prism-cut polycarbonate lenses distribute the LED light more evenly, while silver separator bands make each tier easier to distinguish. The modular PME-series construction simplifies component changes, and vibration-absorbing rubber supports dependable use around moving industrial equipment.

🚦 3-Tier Signaling

Red, Yellow, and Green LED tiers provide distinct, steady machine-status indication

⚡ 24V Power

Designed for a 24V AC/DC electrical supply

🔧 45 mm Modular Design

PME-series construction supports flexible mounting and easier component changes

🛡️ IP52 Protection

Protection against harmful dust deposits and dripping water up to 15° from vertical

⚠️ Confirm Voltage, Mounting, and Lead Length

Before ordering, verify the 24V AC/DC supply, required 3-tier color sequence, mounting method, environmental conditions, and available wiring length.

This tower includes a 25-inch lead. Installations using a 750 mm or 1000 mm pole require a longer lead, which can be modified or requested from the factory.

📋 Compatible Mounting Options

Select the mounting arrangement that matches the machine layout and viewing position:

Pole Mount: Compatible pole plus base
Wall Mount: Compatible pole plus wall bracket
Surface Mount: MAP-0022 22 mm pole with a compatible base, or MAP-M043 threaded 43 mm pole secured through a pre-drilled hole with lock nuts

View the Menics Signal Light Mounting Accessory Chart to match poles, bases, and brackets.

Key Features & Benefits

3 steady LED tiers in red, yellow, and green
24V AC/DC power rating
45 mm tower diameter for compact industrial installations
Prism-cut lenses promote even light distribution
Silver separator bands clearly define each signal tier
Modular PME-series design simplifies component replacement
Vibration-absorbing rubber supports use near moving equipment
Preassembled tower with a 25-inch wire lead
IP52 ingress protection rating
CE approved and RoHS compliant
No buzzer for visual-only status signaling

Technical Specifications

Manufacturer	Menics
Model Number	PME-302-RYG
Product Type	Modular LED Signal Tower Light
Light Operation	Steady
Power Supply	24V AC/DC
Current Consumption	0.03A (red); 0.045A (yellow); 0.035A (green)
LED Colors	Red, Yellow, and Green
Number of LED Tiers	3 Stacks
Tower Dimensions	207 mm H x 45 mm diameter (8.15 in. x 1.77 in.)
Brightness	10 lm / 800 mcd (red); 11 lm / 880 mcd (yellow); 4 lm / 320 mcd (green)
Buzzer	None
Lead Length	25 in.
Lens Material	Polycarbonate resin
Housing Material	ABS plastic resin
Vibration Rating	3 mm at 10–55 Hz
Ambient Temperature	-15°C to 40°C (5°F to 104°F)
Ambient Humidity	45%–85% relative humidity
Recommended Wire	UL 1007, 22 AWG
Ingress Protection	IP52: Protection against harmful dust deposits and dripping water up to 15° from vertical
Approvals	CE, RoHS

📋 Basic Installation Overview

1. Confirm the Signal Plan: Verify the required lens colors, tier order, viewing angle, and whether visual-only or visual-and-audible signaling is needed.

2. Select the Mount: Choose a compatible pole, base, or wall bracket for the installation surface and required tower height.

3. Verify Electrical Ratings: Confirm the machine supply matches 24V AC/DC before connecting the tower light.

4. Route and Connect Wiring: Protect the 25-inch lead from sharp edges, pinch points, heat, and moving components; use the recommended UL 1007, 22 AWG wiring where applicable.

5. Test Each Signal: Energize and verify every LED tier before returning the equipment to service.

Follow the Menics wiring and mounting instructions and all applicable electrical codes.

📦 What's Included

• Preassembled Menics PME-302-RYG LED tower light
• Integrated 25-inch wire lead

Mounting requirements vary by installation. Use the accessory chart to select the compatible pole, base, or wall bracket.

📞 Menics PME Series Selection Support

For proper selection, match the tower voltage, number of tiers, lens colors, buzzer requirement, lead length, and mounting hardware to the application.

Open the Menics Signal Light Mounting Accessory Chart to compare compatible mounting components.

	Light Efficient Design LED-8060E40 15W LED Filament Light, 4000K, 120/277V $19.50
	Menics MS70LT-GFFF-Y 70mm LED Beacon Light, 110-220V, Yellow, Flashing, Surface Mount $77.79
	Menics MSP-TPS-01-R Panel Mount Alarm, Terminal Type, Siren, 12V DC, Red $99.09
	AerosUSA 1732036309 DES-PDM M63/9G Circular Cable Entry Plate, 9 Entries $18.75
	Menics M06P-03G LED Indicator, 6mm, Protrusive Head, 3VDC, Green $4.61
	Menics MS70S-G00-B 70mm Xenon Strobe Beacon Light, 12-48V, Blue, Surface Mount $64.42
	Saginaw SCE-8066ELJSS Stainless Steel Junction Enclosure, 8" x 6" x 6" $232.82
	Lumberg Automation RKWT 4-07/2M M12 Cordset, Female Right Angle, 4 Pin, 2 M $16.13
	Menics MS66M-FFF-Y 66mm LED Beacon Light, 110-220V, Yellow, Steady/Flash $56.82

Menics PME-302-RYG 45 mm 3 Stack LED Tower Light, Red Yellow Green, Steady, 24V