Menics PLDL-102-R 25 mm 1 Stack LED Tower Light, Steady, Red, 24V, Long Pole

The Menics PLDL-102-R 1 stack 24V LED tower light has a 25 mm diameter with a red lens and a steady light. Lens is prism cut, to provide an even light distribution. This PLD series light has a 200 mm anodized aluminum body and is useful for small device applications. The signal light itself comes pre-assembled, with a lead wire connection. Lock nut and fixing bolt for surface mounting included. Rated IP 52. Note: See the link to our accessory chart below the description to find out which mounting accessories are compatible with each other.

Specifications

• Mounting- Surface Mount or Wall Mount (See wall mount bracket below)
• Light Operation- Steady
• Power Supply- 24V DC
• Current Consumption- 0.03 Amps
• Lens Colors- Red
• Number of Tiers- 1 Stack
• Lens Material- Polycarbonate Resin
• Housing Material- Anodized Aluminum w/ ABS Plastic Cap
• Hardware- Aluminum Fixing Bolt & Steel Lock Nut
• Dimensions (Tower Light Only)- 256.5 mm Height x 25 mm Diameter (10" x 1")
• Brightness- 7 Lumens, 560 mcd
• Buzzer- None
• Vibration- 3 mm @10~55Hz
• Ambient Temperature- -15 C to 40 C (5 F to 104 F)
• Storage Temperature- -20 C to 70 C (-4 F to 158 F)
• Insulation Resistance- Over 100 MOhm (500V DC mega)
• Ambient Humidity- 45-85% Relative Humidity
• Recommended Wire Size- 1007 UL / 22 AWG
• IP Protection- IP 52 (Protection from harmful dust deposits and water drops up to 15 degrees from vertical)
• Approvals- CE, RoHS Compliant

Find out which mounting accessories you need with our Menics Signal Light Mounting Accessory Chart