|
The Macromatic VWKP110D is a voltage monitor relay. This 8 Pin plug-in relay has a nominal voltage of 110V DC and an output of 10A DPDT. This voltage band relay is used with equipment that needs to operate within a certain voltage range. The VWKP110D features adjustable over and under voltage presets, and an adjustable drop out time delay ranging from 0.1-10 sec. The VWKP110D has an LED indicator that is red when the unit is energized or green when it is not. It uses an 8 Pin 70169-D octal socket.
Note: Image is an approximation. Actual part may differ.
Specifications
- Relay Function- Voltage Band
- Nominal Voltage- 110V DC
- Output- 10A DPDT
- Drop-out Time Delay- 0.1-10 sec
- Over Voltage Range- 83-138V DC
- Under Voltage Range- 62-130V DC (75-95% of Nominal)
- Load- <2VA
- Operating Temperature- -28 C to 65 C (-18 F to 149 F)
- Storage Temperature- -40 C to 85 C (-40 F to 185 F)
- Voltage Tolerance- +/-50% of Nominal Voltage
- Output Contacts- 10A @ 240V AC, 7A @ 30V DC, 1/4HP @ 120/240V AC, C300
- Life- Mechanical: 10,000,000 Operations
Full Load: 100,000 Operations
- Response Time- Pick-up: 0.5 sec
Drop-out: 0.1-10 sec
- Reset- Automatic
- Transient Protection- 2000 volts per IEC 61000-4-5 Level 3 (+/- 2kV)
- Dimensions- 2.4" Height x 1.7" Width x 3.5" Depth
- Approvals- UL and CUL recognized, CE, UL & CUL listed (with Socket)
When the voltage stays between the preset over and under voltage settings, the unit is energized. If the voltage goes over or under the preset range for a greater duration than the drop-out time delay, then it de-energizes. Once the voltage falls back within the safety range for a longer duration than the 0.5 sec pick up delay, the relay is energized again.
Macromatic VWKP Series Relay Installation Manual
VWKP110D 110VDC Macromatic Voltage Band Monitor Relay
|
|
|