 |
 |
 |
|
LiteCycle SG-PB-3003Y 3-Position 30 mm Yellow Push Button Control Enclosure
High-visibility 3-position industrial push button enclosure with a yellow molded-resin faceplate, black PBT base, 30 mm operator openings, and durable control-station construction.
Why Choose the LiteCycle SG-PB-3003Y Push Button Enclosure?
The LiteCycle SG-PB-3003Y is a 3-position push button switch box built for compact industrial control stations. Its caution-yellow molded-resin faceplate improves visibility around machinery, while the black PBT Plastic housing provides a durable mounting base for 3 30 mm push button devices.
Counter-rotating cover locks and molded entry provisions simplify assembly and service access. Its PBT construction is oil resistant and suitable for high-temperature environments. The 180 mm Length X 80 mm Width X 70 mm Height (7.09" x 3.13" x 2.82") enclosure provides a clean, organized housing that keeps the operator controls grouped in one compact station.
🎛️ 3 Control Positions
Provides 3 dedicated openings for compatible 30 mm push button devices
🟨 Yellow Molded Faceplate
High-visibility molded-resin faceplate helps the control station stand out
🧰 30 mm Device Openings
Designed specifically for industrial push button and operator-station assembly
🛢️ Durable PBT Housing
Oil-resistant enclosure material supports use around industrial machinery
⚠️ Confirm Operator and Cable-Entry Compatibility
This enclosure is designed around 30 mm operator openings. Before assembly, verify the dimensions of the push buttons or control devices, the mounting depth behind the faceplate, and 30 mm knockout size. Choose cable-entry hardware and wiring methods that match the installation environment.
⚠️ High-Visibility Control Station
The yellow faceplate helps distinguish this operator station from surrounding equipment and standard black enclosures. It is well suited to caution-related controls, machine functions, and control points that should be easy for operators or maintenance personnel to locate.
Key Features & Benefits
- 3-position layout for 30 mm operator devices
- Yellow Molded Resin for high control-station visibility
- Black PBT Plastic housing
- Counter-rotating cover locks support secure closure and service access
- Molded entry provisions simplify cable routing and enclosure preparation
- Overall dimensions: 180 mm Length X 80 mm Width X 70 mm Height (7.09" x 3.13" x 2.82")
- Oil-resistant construction supports routine cleaning around industrial equipment
- This three-position enclosure provides room for a compact multi-function control station. It can organize three related machine controls in one visible housing, helping operators work from a single clearly identified location.
Technical Specifications
|
Dimensions
|
180 mm Length X 80 mm Width X 70 mm Height (7.09" x 3.13" x 2.82")
|
|
Housing Base Color
|
Black
|
|
Base Material
|
PBT Plastic
|
|
Face Plate
|
Yellow Molded Resin
|
|
Push Button Entry
|
30 mm
|
|
Positions
|
3
|
|
Knockout Size
|
30 mm
|
📋 Push Button Enclosure Installation Overview
1. Confirm the Layout: Verify that the planned devices use 30 mm mounting openings and fit within the available enclosure depth.
2. Prepare the Cable Entry: Open or use the molded entry provision without damaging the enclosure body, then install the correctly sized cable-entry fitting.
3. Install the Operators: Mount the push buttons or compatible operators in the faceplate and tighten them according to the device manufacturer’s instructions.
4. Complete the Wiring: Route conductors neatly, maintain adequate clearance, and keep wiring away from the cover-locking areas.
5. Close and Inspect: Reinstall the cover, engage the counter-rotating locks, and verify that the enclosure closes evenly before placing the station into service.
|
|
|
 |
|
 |
|
