 |
 |
 |
|
IMO Precision Controls SPS-1-012-5DC is a 12W Single Phase DIN Rail Power Supply. It converts a universal input of 85-264VAC or 120-370VDC into an output of 5V DC at 2.4 Amps, making it ideal for low voltage control circuits. This Class 2 power supply features an efficiency rating of 82% to minimize energy loss.
- Class II isolation enhances electrical safety
- Modular design for easy installation on DIN-Rails
- Short circuit protection safeguards against faults & overloads
- Plastic housing
- Delivers DC power to control panels & automation systems
- Suited for powering PLCs, sensors, relays, process controllers, and HMIs
- 3 year manufacturer's warranty
- UL approved
Specifications
- Dimensions: 0.7" Width x 3.54" Height x 2.28" Depth
- Input Voltage: 85-264VAC or 120-370VDC
- Output Wattage: 12W
- Output Voltage: 5V DC
- Output Current: 2.4 Amps
- Efficiency: 82%
- Approvals: cURus - Class 2, CE
- Isolation Voltage: 3000VAC / 4242VDC
- Isolation Resistance: 100MOhm @ 500VDC
- Ambient Temperature: -4 F to 158 F
- Storage Temperature: -40 F to 185 F
- Relative Humidity: 20 to 90%
- Cooling: Free Air Convection
- Line Frequency: 47 to 63Hz
- Inrush Current (115/230VAC): 25/45A
- Turn On Time: 2000ms at full load
- Voltage Fall Time: 80ms
- Voltage Rise Time: 80ms
- Hold Up Time: 30/12ms
- Ripple & Noise: 80mVp-p
- Voltage Trim Range: 4.5-5.5VDC
- DC ON (Green LED): 3.5-4.5VDC
- DC LOW (Red LED): 3.5-4.5VDC
- Rated Overload Protection: 110 to 145%
- Overvoltage Protection: 5.75-6.5VDC
- Output Short Circuit: Hiccup Mode
- Connector Size Range: AWG 24-12 (0.2-2.5mm2
) flexible / solid cable
IMO Precision Controls Power Supply Selection Guide
|
|
|
 |
|
 |
|
