 |
 |
 |
|
HTP CM1N02000C021 DIN 43650 Form B Molded Cable Assembly, 1m PVC, 230V
Black DIN 43650 / EN 175301-803 Form B molded cable assembly with 11 mm pin spacing, 1 meter of PVC H05VVF 3-conductor cable, & 2 poles + 2 grounds. Includes integrated NBR gasket. IP67 protection.
Why Choose the HTP CM1N02000C021 Form B Cable Assembly?
The HTP CM1N02000C021 is a DIN 43650 / EN 175301-803 Form B molded cable assembly designed for solenoid valve and sensor connections. It uses 11 mm pin spacing with 2 poles + 2 grounds and includes 1 meter of black PVC H05VVF 3-conductor cable.
The molded connector helps reduce field wiring time while supporting a sealed IP67 connection. Ground positions at 6 and 12 o'clock make the assembly suitable for valve installations that require flexible cable exit orientation.
🔌 Form B Connector
DIN 43650 / EN 175301-803 Form B design with 11 mm pin spacing
📏 1m Cable Length
Includes 1 meter / 3.28 ft. of PVC H05VVF 3-conductor cable
⚙️ Dual Ground Positions
2 poles + 2 grounds jumpered at the 6 and 12 o'clock positions
🛡️ IP67 Rated
Integrated NBR gasket supports sealed industrial valve connections
⚠️ Confirm Form B Fit Before Ordering
This molded cable assembly is designed for DIN 43650 / EN 175301-803 Form B interfaces with 11 mm contact spacing. Confirm the valve interface, rated voltage, wiring code, and ground position before installation.
The assembly is rated for 230V AC/DC and uses ground positions at 6 and 12 o'clock.
📋 Wiring Code
Pin #1: Brown
Pin #2: Blue
Ground: Yellow/Green
This wiring configuration is for 2 poles + 2 grounds.
Key Features & Benefits
- Primarily used as a solenoid valve or sensor connector
- 11 mm contact spacing
- 2 poles + 2 grounds
- Ground jumpered at the 6 and 12 o'clock positions
- 230V AC/DC rated voltage
- Integrated NBR gasket
- CE, RoHS, and IP67 rated
Technical Specifications
|
Manufacturer
|
HTP
|
|
Order Code
|
OM513ZRB2P1M
|
|
Product Type
|
DIN 43650 Form B Molded Cable Assembly
|
|
Standard
|
DIN 43650 / EN 175301-803
|
|
Housing Color
|
Black
|
|
Cable Length
|
1 Meter / 3.28 ft.
|
|
Cable Type
|
PVC H05VVF
|
|
Contact Spacing
|
11 mm
|
|
Number of Poles
|
2 Poles + 2 Ground
|
|
Ground Position
|
Jumpered at 6 and 12 o'clock
|
|
Number of Conductors
|
3
|
|
Cable Diameter
|
6.5 mm
|
|
Conductor Section
|
0.75 mm2
|
|
Fixing Screw
|
M3 x 0.5, 25 mm Length
|
|
Integrated Gasket
|
NBR
|
|
Operating Temperature
|
-22°F to +176°F
|
|
Rated Voltage
|
230V AC/DC
|
|
Stripping
|
35 mm
|
|
Peeling & Tinning
|
5 mm
|
|
Approvals
|
CE, RoHS
|
|
Protection Class
|
IP67
|
|
Included Components
|
Connector, integrated NBR gasket, and center screw
|
📋 Basic Installation Overview
1. Confirm Interface: Verify that the valve or sensor uses DIN 43650 / EN 175301-803 Form B with 11 mm pin spacing.
2. Check Wiring: Match Pin #1 to brown, Pin #2 to blue, and ground to yellow/green before energizing the circuit.
3. Confirm Ground Position: Use the 6 and 12 o'clock ground positions to match the device orientation.
4. Seat Gasket: Make sure the integrated NBR gasket is properly seated between the connector and device interface.
5. Secure Connector: Fasten the connector with the M3 x 0.5 center screw.
Always disconnect power before installation and follow applicable electrical codes for the equipment and environment.
📦 What's Included
• HTP OM513ZRB2P1M DIN 43650 Form B molded cable assembly
• 1 meter / 3.28 ft. PVC H05VVF cable
• Integrated NBR gasket
• Center screw
|
|
|
 |
|
 |
|
