 |
Boxco BC-AGP-091208 is a hinged lid enclosure. Back plates for mounting interior components, wall mounting brackets, and lockable latches sold separately (see below). A separate ring gasket is not needed, as the gasket is already molded around the lid of the enclosure. Holes can be drilled into the sides for cable glands if cables need to be run through the enclosure.
- 3.54" Width x 4.72" Length x 3.35" Depth (90 x 120 x 85 mm)
- Made from ABS plastic
- Solid gray cover
- Molded hinges
- Stainless steel latch
- Built in key ring
- -40 C to 70 C (-40 F to 158 F)
- Rated IP 66/67, NEMA 4X
- Flammability rating: UL94-HB
- Impact test: IK07/08
- CE, TUV, RoHS
Boxco P Series Enclosure Downloads
Boxco Solid Gray Hinged Lid Enclosure, 90x120x85mm, ABS Plastic
|
|
|
