Overview
The
HTP DIN 43650 Form B molded cable assembly provides a factory-molded connection for compatible solenoid valves and industrial devices. It follows the DIN 43650 and EN 175301-803 Form B interface with 11mm contact spacing and includes 10 meters (32.8 feet) of black H05VV-F PVC cable.10m Cable11mm SpacingIP67
The assembly uses two powered poles and two protective-ground positions at the 6 and 12 o'clock locations. Both ground contacts are internally jumpered to the yellow/green conductor, creating a consistent protective-earth connection regardless of the compatible device's ground orientation.
🔌 Wiring Code: 2 Poles + 2 Ground
|
Connector Position
|
Wire Color
|
|
Pin 1
|
Brown
|
|
Pin 2
|
Blue
|
|
Ground — 6 & 12 O'Clock
|
Yellow/Green
|
The two ground contacts are internally jumpered and connected to the same yellow/green protective-earth conductor.
Key Features
- DIN 43650 / EN 175301-803 Form B interface: designed for compatible industrial valve and device connections
- 11mm contact spacing: matches the standard Form B pin arrangement
- 10m (32.8 ft) molded cable: provides extended reach without a separate field-wired connector
- H05VV-F PVC cable: black, three-conductor cable for protected industrial installations
- Molded connector body: provides an integrated cable-to-connector transition
- IP67 protection: dust-tight and protected against temporary water immersion when correctly installed
- NBR profile gasket: seals the connector interface against dust and moisture
- M3 x 28.7mm center screw: secures the connector to the mating device
- CE and RoHS compliant: supports qualifying industrial applications
✅ Why Choose a Molded Cable Assembly?
The factory-molded cable transition reduces field assembly work and removes the need to terminate conductors inside a detachable connector housing. The 10-meter lead can simplify routing between a valve or sensor and a control enclosure while maintaining a sealed Form B connection at the device.
Applications
This HTP Form B molded cable assembly is intended for compatible industrial devices that use an 11mm DIN 43650 connection, including:
- Hydraulic and pneumatic solenoid valves
- Industrial actuators
- Pressure and flow-control equipment
- Machine automation systems
- Process-control equipment
⚠️ Confirm Electrical and Mechanical Compatibility
Verify the DIN Form B interface, 11mm pin spacing, cable construction, conductor requirements, ground orientation, circuit ratings, and environmental conditions before installation.
The IP67 rating depends on correct gasket placement, complete connector seating, proper center-screw installation, and an undamaged molded cable assembly.
Installation Benefits
- Prewired color code simplifies field identification
- Dual ground positions support compatible 6 and 12 o'clock device orientations
- Long cable reach reduces the need for intermediate connections
- Molded construction limits field assembly at the device
