Secure Cable Entry and Strain Relief
The self-locking ACME thread on the dome top allows the overlapping splines to apply an even, concentric seal. This design helps retain the form seal within the fitting and protects the cable against pull-out forces. The metal housing provides a rugged cable-entry connection for industrial equipment.
Construction and Dimensions
The nickel-plated brass body measures .83" (21 mm) in length, with a .24" (6 mm) mounting thread. The through-hole diameter is .6" (15.2 mm), and the dome and body wrench flats each measure .67" (17 mm). A Buna-N seal supports liquid-tight cable entry.
Features and Benefits
- Nickel-plated brass housing with a Buna-N seal and nylon 6/6 splined bushing.
- Cable outside diameter range: 0.16–0.31 inches (4–8 mm).
- Self-locking ACME dome thread supports even seal compression.
- Resistance to salt water, acids, alkalis, gasoline, and oils.
- Rugged construction for industrial cable-entry applications.
- Halogen- and phosphorus-free construction.
Applications
Recommended uses include cable entry into industrial control panels, junction boxes, machine enclosures, and equipment housings. The nickel-plated brass housing is suited to applications requiring a metal strain relief fitting and a liquid-tight connection.
Installation and Selection Notes
- Match the mounting connection to PG 9 and confirm the .6" (15.2 mm) through-hole dimension.
- Check available thread engagement against the .24" (6 mm) thread length and provide tool access for the .67" (17 mm) wrench flats.
- Use a cable outside diameter within 0.16–0.31 inches (4–8 mm).
- Seat the cable through the seal and tighten the dome to compress the seal evenly around the cable jacket.
- Locking nut sold separately.
- Standard and reduced inserts allow the cable opening to be changed. Match the selected insert to the required cable diameter.
- Contact sales about purchasing individual standard or reduced inserts.
Sealing and Environmental Protection
This cord grip carries IP68 and IP69K protection ratings and NEMA 4X and NEMA 6 ratings. Its pressure rating is 150 psig (10 bar), with submersion capability to 300 feet. Match the cable diameter, mounting arrangement, and sealing components to the installation so the complete cable-entry assembly maintains the required protection.
Cross-References
- Conta Clip 22301.6
- Lütze 600711
- Olflex 52015710 (Cable O.D. 0.12"-0.31")
- Remke RLP09-BR
Compare thread, cable diameter range, dimensions, materials, and required ratings when evaluating a replacement. Cross-reference cable ranges can differ from the 4–8 mm range of this cord grip.
