 |
 |
 |
|
Sealcon ET29AA-BK PG29 90° Elbow Polyamide Conduit Fitting, Size 29
PG 29 black polyamide PA6 elbow conduit fitting for nominal size 29, with IP 65 / NEMA 4 protection, a built-in clamping ring, tool-free opening, and a preassembled design.
Why Choose the Sealcon ET29AA-BK Elbow Conduit Fitting?
The Sealcon ET29AA-BK is a PG 29 turn-to-seal elbow conduit fitting for nominal size 29 conduit. Its angled body redirects the conduit path while the integrated clamping ring helps secure the connection.
The black polyamide PA6 body is rated IP 65 / NEMA 4 and operates from -40 C to 110 C (-40 F to 230 F). The fitting arrives preassembled, opens without tools, and has smooth interior walls to support installation.
↪️ 90° Elbow Routing
Changes conduit direction at the entry point
🔩 PG 29 Thread
Matches PG 29 threaded connection requirements
🛡️ IP 65 / NEMA 4
Moisture & dust rating
🧰 Preassembled Design
Built-in clamping ring with no additional parts needed
⚠️ Confirm PG Thread and Conduit Size
Verify that the equipment entry uses a PG 29 thread and that the conduit matches nominal size 29. Also compare the dimensions with the available installation space.
📋 Turn-to-Seal Design
The preassembled elbow uses an integrated clamping ring and can be opened without tools. This construction reduces loose components during installation while the smooth interior walls provide a clean passage through the fitting.
Key Features & Benefits
- Thread size: PG 29
- Fits nominal conduit size 29
- Black polyamide PA6
- Ingress protection: IP 65 (NEMA 4)
- Operating temperature: -40 C to 110 C (-40 F to 230 F)
- Comes pre-assembled, no additional parts needed
- Built-in clamping ring
- Can be opened without tools
- Smooth interior walls
- UR, RoHS, Deca BDE Approval
- V0 rated
- Alternate Hummel part number: 1.223.2936.12
- Sold individually
Technical Specifications
|
Brand
|
Sealcon
|
|
Product Type
|
Turn-to-Seal Elbow Conduit Fitting
|
|
Sealcon Part Number
|
ET29AA-BK
|
|
Hummel Part Number
|
1.223.2936.12
|
|
Thread Size/Type
|
PG 29
|
|
Inside Diameter
|
1.14" (29 mm)
|
|
Body Length
|
3.23" (82 mm)
|
|
Wrench Flat Dome
|
1.81" (46 mm)
|
|
Height
|
2.09" (53 mm)
|
|
Thread Length
|
.47" (12 mm)
|
|
Material
|
Black polyamide PA6
|
|
Ingress Protection
|
IP 65 (NEMA 4)
|
|
Operating Temperature
|
-40 C to 110 C (-40 F to 230 F)
|
📋 Basic Installation Overview
1. Verify Compatibility: Confirm the PG 29 thread and nominal size 29 conduit match the installation.
2. Check Clearance: Compare the body length, height, thread length, and wrench-flat dimension with the available space.
3. Open the Fitting: Use the tool-free opening to access the conduit path and built-in clamping ring.
4. Insert and Secure Conduit: Seat the conduit through the smooth interior and secure it with the integrated clamping design.
5. Inspect the Connection: Confirm the fitting is fully assembled and the conduit is held in the intended position.
Follow the equipment and conduit manufacturer instructions and applicable installation requirements.
📦 What's Included
• (1) Sealcon ET29AA-BK preassembled elbow conduit fitting
• Built-in clamping ring
|
|
|
 |
|
 |
|
