 |
 |
 |
|
Sealcon ET16NA-BK 1/2" NPT Elbow Polyamide Conduit Fitting, Fits Size 17
Black polyamide PA6 turn-to-seal elbow conduit fitting with 1/2" NPT thread fits nominal conduit size 17. IP 65.
Why Choose the ET16NA-BK Conduit Fitting?
The ET16NA-BK is a Sealcon turn-to-seal elbow conduit fitting for protected 90° conduit transitions. It uses a 1/2" NPT thread and fits nominal conduit size 17. in compact machine and enclosure wiring layouts.
The pre-assembled polyamide PA6 body includes an integrated clamping ring, smooth inside walls, and a tool-free opening design. It is suited for control panels, machine wiring, automation equipment, and routed conduit where a sealed elbow connection is needed.
🔩 1/2" NPT Thread
Installs into 1/2" NPT threaded panel or enclosure openings
📏 Fits DN 17
Matches nominal conduit size 17 for routed wire and cable protection
🧱 Durable Material
Black polyamide PA6
🛡️ Rated Protection
IP 65
⚠️ Confirm Thread, Conduit Size, and Bend Clearance
Before ordering, verify the 1/2" NPT thread, nominal conduit size 17, enclosure clearance, bend direction, and available space around the elbow body. This helps prevent interference with nearby components or panel hardware.
📋 Turn-to-Seal Design Notes
This elbow fitting comes pre-assembled and can be opened without tools, helping reduce installation time when routing conductors through tight enclosure or machine spaces.
Key Features & Benefits
- 1/2" NPT thread connection
- Fits nominal conduit DN size 17
- Black polyamide PA6
- Pressure Rating: IP 65 (NEMA 4)
- Operating temperature: -40 C to 110 C (-40 F to 230 F)
- Comes pre-assembled, no additional parts needed
- Integrated clamping ring
- Can be opened without tools
- Smooth inside walls
- V0 rated
Technical Specifications
|
Product Code
|
ET16NA-BK
|
|
Vendor Part Number
|
ET16NA-BK
|
|
Product Type
|
Turn-to-Seal Elbow Conduit Fitting
|
|
Hummel Number
|
1.223.1221.72
|
|
Material
|
Black polyamide PA6
|
|
Thread Size/Type
|
1/2" NPT
|
|
Inside Diameter
|
.63" (16 mm)
|
|
Body Length
|
2.20" (56 mm)
|
|
Wrench Flat Dome
|
1.18" (30 mm)
|
|
Height
|
1.38" (35 mm)
|
|
Thread Length
|
.39" (10 mm)
|
|
Fits Conduit DN Size
|
17
|
|
Protection Rating
|
Pressure Rating: IP 65 (NEMA 4)
|
|
Operating Temperature
|
-40 C to 110 C (-40 F to 230 F)
|
📋 Basic Installation Overview
1. Confirm Thread: Match the enclosure opening to the 1/2" NPT thread.
2. Verify Conduit Size: Confirm the conduit matches nominal size 17.
3. Open Fitting: Use the tool-free opening design as needed during wire routing.
4. Seat the Conduit: Use the integrated clamping ring to secure the conduit path.
5. Inspect Routing: Check that wires move through the smooth interior without sharp bends or pinch points.
Always verify installation requirements against the equipment, panel, and conduit system before use.
📞 Sealcon / Hummel Support
Confirm thread size, conduit DN size, material, and sealing requirements against the equipment design before installation.
|
|
|
 |
|
 |
|
