 |
 |
 |
|
The Kacon K16-292-G-24V momentary push button switch has a rectangular, green lens with a DPDT contact arrangement. Used for 16 mm (5/8") mounting holes. Snap action contacts are 24K gold plated alloy, rated at 1A & 120VAC. Lens illuminated by 24V DC LED. Rated IP 65. Momentary push button switches, as opposed to maintained switches, are only in an activated state while they are pressed.
Specifications
- Push Button Type- Momentary
- Lens Shape & Color- Rectangle, Green
- Contact Arrangement- DPDT (2NO + 2 NC)
- Contact Material- 24K Gold Plated Alloy
- Overall Dimensions- 39 mm Length x 24 mm Width x 18 mm Height (1.53" x 0.94" x 0.7")
- Max. Rated Voltage- 250VAC, 110VDC
- Max. Switching Current- 3 Amps Max.
- Rated Current- 1 Amp @ 24V DC / 120V AC, 0.5 Amps @ 250V AC
- Min. Switching Current- 0.001 Amps 5V DC
- LED Voltage- 24V DC
- LED Rated Current- 0.015 Amps
- LED Lifespan- 50,000 hrs.
- Contact Resistance- Max. 50 mOhm
- Insulation Resistance- 100 MOhm at 500VDC
- Dielectric Strength- 2000 VAC for 1 min
- Vibration Resistance- 5-55Hz dual amplitude: 0.75mm
- Shock Resistance- Endurance: 500m/s2, Operating error: 200m/s2
- Mechanical Life- Min. 1,000,000
- Electrical Life- Min. 100,000
- Operating Temperature: -25 C to +55 C (-13 F to 131 F)
- Storage Temperature: -30 C to +80 C (-22 F to 176 F)
- Ambient Humidity- 45-85% Relative Humidity
- Degree of Protection- IP 65 (total protection from dust & low pressure water jets from any direction)
- Terminal Soldering- 20W 5 sec / 260 C 3 sec
- Approvals- UL & CUL Recognized, CE
If you need the push button to perform certain functions, such as having timed on/off cycles, it does require the use of a relay, which is sold separately. Please contact us for more information on Kacon relays
|
|
|
 |
|
 |
|
