 |
The Menics PTE-SCF-502-RYGBC-B 5 stack LED tower light has a 56mm diameter and is rated for 24V. It has red yellow green blue & clear lenses with a steady & flashing light and is prewired with 25" lead. This PTE series direct mount light has a modular system, making it easier to switch out parts if needed. It has prism cut lenses for optimal light distribution. The tower light itself comes pre-assembled. Perfect for applications in factory automation. Steady or flashing mode depends on how it is wired (see wiring diagram). Rated IP 65.
Specifications
- Light Operation- Steady & Flashing
- Power Supply- 24V AC/DC
- Mounting/Connection- Direct Mount / Lead Wires (see mounting accessories below)
- Lead Length- 25"
- Lens Colors- Red Yellow Green Blue & Clear
- Number of LED Tiers- 5 Stack
- Dimensions (Tower Light Only)- 309 mm Height x 56 mm Diameter (12.17" x 2.2")
- Current Consumption- 0.033 Amps (Red) 0.027 Amps (Yellow) 0.042 Amps (Green Blue & Clear)
- Brightness- 13 Lumens, 1040 mcd (Red), 12 Lumens, 960 mcd (Yellow), 8 Lumens, 640 mcd (Green), 4 Lumens, 320 mcd (Blue), 24 Lumens, 1910 mcd (Clear)
- Flash Rate- 80 times per minute
- Vibration- 0.75mm at 10-55Hz
- Ambient Temperature- -15 C to 40 C (5 F to 104 F)
- Storage Temperature- -40 C to 70 C (-40 F to 158 F)
- Ambient Humidity- 45-85% Relative Humidity
- Recommended Wire Size- 1007 UL / 22 AWG
- IP Protection- IP 65 (Total protection from dust and water jets in any direction)
- Approvals- CE, UL, RoHS
Find out which mounting accessories you need with our Menics Signal Light Mounting Accessory Chart
Menics PTE-SCF-502-RYGBC-B 5 Tier Flashing 24V LED Signal Tower Light
|
|
|
