 |
 |
 |
|
LiteCycle SG-TB-20P15-GS 20 Circuit Terminal Enclosure, Gray ABS, 120V AC, 15A
Organize 20 circuits within one terminal enclosure.
✅ Circuit Capacity and Fit
This enclosure supports 20 circuits with 40 terminations and accepts 14–20 AWG wire. Confirm the 160 mm x 150 mm x 65 mm dimensions against the installation space. Electrical ratings are 120V AC, 60 Hz, and 15A.
Why Choose the LiteCycle SG-TB-20P15-GS Terminal Enclosure?
The LiteCycle SG-TB-20P15-GS terminal enclosure provides a protected junction point for machinery and control system wiring. The integrated terminal block supports 20 circuits inside a gray ABS housing with a solid ABS cover. The enclosure offers 40 terminations for 14–20 AWG conductors. Center marks guide cable entry drilling, and independent screw connections on either side of each terminal allow the incoming and outgoing wiring to be handled separately.
🔗 Integrated ConnectionsKeep related wiring junctions together in one enclosure. 🏠 Solid CoverKeep the terminal block and wiring enclosed during normal use. 🔧 Marked Drilling LocationsUse the center marks to locate cable entry holes. 🛠️ Maintenance AccessRemove the cover when connection changes or servicing are needed.
Key Features & Benefits
- Simplified junction layout: The integrated terminal block combines the connection point and housing in one assembly.
- Inspection access: The removable cover allows the terminal area to be reached for wiring checks and maintenance.
- Entry preparation: Center marks provide a reference for positioning drilled cable entries.
- Independent wiring: Separate screws on each side of a terminal allow either connection to be wired independently.
Specifications
| Brand | LiteCycle |
|---|
| Part Number | SG-TB-20P15-GS |
|---|
| Product Type | Enclosure with integrated terminal block |
|---|
| Dimensions | 160 mm Length X 150 mm Width X 65 mm Height (6.3" x 5.9" x 2.56") |
|---|
| Housing Color | Gray |
|---|
| Base Material | ABS Plastic |
|---|
| Cover Material | ABS Plastic |
|---|
| Connection Capacity | 14-20 AWG |
|---|
| Wire Entry | Center Marks for Drilling |
|---|
| Terminations | 40 |
|---|
| Circuits | 20 |
|---|
| Rated Voltage | 120V AC |
|---|
| Rated Frequency | 60 Hz |
|---|
| Rated Current | 15 Amps |
|---|
| Ingress Protection | IP65 when used with an IP65 cable gland |
|---|
| Approvals | UL 508A:2005, CE |
|---|
📦 Enclosure Assembly
• LiteCycle SG-TB-20P15-GS enclosure
• Integrated terminal block
• ABS plastic cover
⚠️ IP65 Cable Gland Requirement
The IP65 rating applies when the enclosure is used with an IP65 cable gland. Select suitable glands for the cable entries and maintain the enclosure seals during installation.
Keep the application within the stated 120V AC, 60 Hz, and 15A ratings.
🔧 Installation Planning
Plan the entries: Use the center marks to plan drilled cable entries. Match each opening to the selected cable gland.
Match the wire: Use conductors within the listed 14–20 AWG connection capacity.
Check cover access: Leave room to remove the cover for wiring and maintenance.
⚙️ Typical Applications
Control connections and wiring trunking for machinery, robotics, and control systems. Solar equipment applications must remain within the stated electrical ratings.
|
|
|
 |
|
 |
|
