 |
 |
 |
|
The Macromatic THR-12261-31 is a single shot falling edge Time Delay Relay. This encapsulated relay has an input voltage of 240V AC. It has an adjustable time range of 1 to 100 seconds. Time is adjusted by turning the blue dial at the top. The encasement of the unit is made for use under harsh conditions. The design is microprocessor-based to provide better functionality, and is perfect for high volume OEM applications.
Note: Image is for reference, actual part may differ
Specifications
- Relay Function- Single Shot Falling Edge
- Mounting Style- Surface Mount with #8 or #10 Screw
- Termination- 0.25" Male Quick Connect Terminals
- Relay Timing Range- 1 - 100 seconds
- Input Voltage- 240V AC
- Output- 10 Amps SPDT
- Voltage Tolerance- AC Operation: +10/-15% of nominal at 50/60 Hz. DC Operation: +10/-15% of nominal voltage
- Load- Max. 2VA
- Setting Accuracy- Maximum Setting (Adjustable): +5%, -0% Minimum Setting (Adjustable): +0%, -50% Fixed Time Delay: +/-2% or 50ms, whichever is greater
- Repeat Accuracy- The greater amount of +/- 0.1% or +/- 0.04 Sec
- Reset Time- 40ms
- Startup Time- 0.05 seconds
- Maintain Function Time- 0.01 seconds
- Operating Temperature- -28 C to 65 C (-18 F to 149 F)
- Storage Temperature- -45 C to 85 C (-49 F to 185 F);
- Output Contacts- 10A @ 240VAC / 7A @ 28VDC SPDT, 1/4 hp @ 120VAC (N.O.)
- Life- Mechanical: 10,000,000 operations, Full Load: 100,000 operations
- Overall Dimensions- 2" Height x 2" Width x 1.14" Depth
- Approvals- C UR US, CE
With a Single Shot Falling Edge, the relay de-energizes when the trigger is implemented. Taking away the trigger energizes the relay and begins the time delay. After the time delay, it de-energizes again, and needs the trigger introduced and taken out to re-energize. Adding and taking away the trigger before the time delay ends will keep the relay energized.
Macromatic THR Series Relay Installation Instructions
|
|
|
 |
|
 |
|
